Free shipping on purchases over 300€

Online support / Phone
Email : info@top-welding.com

Choose your country Germany

€ (EUR)

No products

0,00 € Shipping
0,00 € Total

Check out

  • Your Account
Welding auxiliary equipment


Welding auxiliary equipment Germany

Choose your country
There are 60 products in category Welding auxiliary equipment.

Products by page


  • Thinner Cutting Discs Abra Beta A36R Smart
    CombinationsPricequantity
    0,96 €
    0,96 €

    Flat Centre

    Diameter 115

    Thickness : 1.0 and 1.6mm

    Bore 22.23mm

    Max RPM 13300.

    For universal use for cutting non-treated steels.

    Accurate and concentrated material removal that reduces the power consumption of the power tool. Minimized burr formation.


    0,96 € 0,79 € + VAT * Order managed in 24h

    prompt deliveryFast delivery (3-5 days) with DHL Courier in Germany

    Choose your country
    Do you have a question ? We answer 7 days a week !
    Access to the data sheet
  • Thinner Cutting discs for Stainless Steel Abra Beta A36N Silver
    CombinationsPricequantity
    1,16 €
    1,16 €

    For use for cutting stainless steels, steel alloys and treated steels.

    Accurate and concentrated material removal that reduces the power consumption of the power tool.

    Minimum heating of the disc.

    Minimized burr formation.

    Thickness: 1.0 and 1.6mm.

    Bore 22.23mm

    Max RPM 13300

    Flat Centre


    1,16 € 0,95 € + VAT * Order managed in 24h

    prompt deliveryFast delivery (3-5 days) with DHL Courier in Germany

    Choose your country
    Do you have a question ? We answer 7 days a week !
    Access to the data sheet
  • Thinner cutting disc Abra Beta A30N for Aluminium
    CombinationsPricequantity
    1,16 €
    1,16 €

    For use for cutting aluminium, brass and bronze.

    The abrasive lubrication prevents clogging during machining.

    Thickness: 1.2 and 1.6mm

    Bore 22.23

    Max RPM 13300

    Diameter 115


    1,16 € 0,95 € + VAT * Order managed in 24h

    prompt deliveryFast delivery (3-5 days) with DHL Courier in Germany

    Choose your country
    Do you have a question ? We answer 7 days a week !
    Access to the data sheet
  • Thinner cutting discs Abra Beta Stainless Steel/Steel A46Q 115mm Silver
    CombinationsPricequantity
    1,22 €
    1,22 €

    Diameter 115

    Thickness: 1.0 and 1.6mm

    Bore 22.23mm

    Max RPM 13300.

    Flat Centre

    For universal use for cutting stainless steels, steel alloys and treated and non-treated steels.

    Minimized burr formation


    1,22 € 1,00 € + VAT * Order managed in 24h

    prompt deliveryFast delivery (3-5 days) with DHL Courier in Germany

    Choose your country
    Do you have a question ? We answer 7 days a week !
    Access to the data sheet
  • Thinner cutting discs Abra Beta Stainless Steel/Steel A46Q 125mm Silver
    CombinationsPricequantity
    1,28 €
    1,28 €

    Diameter 125

    Thickness: 1.0 and 1.6mm

    Bore 22.23mm

    Max RPM 12200.

    Flat Centre

    For universal use for cutting stainless steels, steel alloys and treated and non-treated steels.

    Minimized burr formation


    1,28 € 1,05 € + VAT * Order managed in 24h

    prompt deliveryFast delivery (3-5 days) with DHL Courier in Germany

    Choose your country
    Do you have a question ? We answer 7 days a week !
    Access to the data sheet
  • Grinding discs Abra Beta A24P Smart
    CombinationsPricequantity
    1,50 €
    1,58 €

    Depressed Centre

    Diameter: 115 and 125mm

    Thickness 6.4mm

    Bore 22.23mm

    Max RPM 13300 x diameter 115 and RPM 12200 x diameter 125

    For use for deburring steels with extended grinding surfaces and heavy-duty cast irons.


    1,50 € 1,23 € + VAT * Order managed in 24h

    prompt deliveryFast delivery (3-5 days) with DHL Courier in Germany

    Choose your country
    Do you have a question ? We answer 7 days a week !
    Access to the data sheet
  • Grinding discs for Stainless steel Abra Beta A30P Silver
    CombinationsPricequantity
    1,50 €
    1,78 €

    Diameters: 115 and 125mm

    Thickness 6.5mm

    Bore 22.23mm

    Max RPM 13300 x diameter 115 and RPM 12200 x diameter 125.

    Depressed Centre

    For use for deburring stainless steels.

    Also suitable for deburring hard cast irons.


    1,50 € 1,23 € + VAT * Order managed in 24h

    prompt deliveryFast delivery (3-5 days) with DHL Courier in Germany

    Choose your country
    Do you have a question ? We answer 7 days a week !
    Access to the data sheet
  • Grinding disc Abra Beta A30N for aluminium

    For use for deburring aluminium, brass and bronze.

    The abrasive lubrication prevents clogging during machining.

    Diameter 115

    Thickness 6.5mm

    Bore 22.23

    Max RPM 13300


    1,57 € 1,29 € + VAT * Order managed in 24h

    prompt deliveryFast delivery (3-5 days) with DHL Courier in Germany

    Choose your country
    Do you have a question ? We answer 7 days a week !
    Access to the data sheet
  • Thinner cutting discs Abra Beta STEEL/STAINLESS STEEL high performance
    CombinationsPricequantity
    1,57 €
    1,57 €

    Exceptionally high performance discs.

    For use on stainless steels, steel alloys and treated and nontreated steels. High level material removal combined with low disc consumption.

    Minimum heating of the disc during machining. Minimized burr formation.

    The use of high power tools is recommended.

    Thickness: 1 or 1.6mm

    Bore 22.23

    Max RPM 13300

    Diameter 115


    1,57 € 1,29 € + VAT * Order managed in 24h

    prompt deliveryFast delivery (3-5 days) with DHL Courier in Germany

    Choose your country
    Do you have a question ? We answer 7 days a week !
    Access to the data sheet
  • Grinding discs Abra Beta Stainless steel/Steel A24Q Silver
    CombinationsPricequantity
    1,64 €
    1,78 €

    Diameters: 115 and 125mm

    Thickness 6.5mm

    Bore 22.23mm

    Max RPM 13300 x diameter 115 and RPM 12200 x diameter 125

    Depressed Centre

    For use for deburring steels, stainless steels and heavy-duty cast irons.

    Suitable for deburring on extended surfaces.


    1,64 € 1,34 € + VAT * Order managed in 24h

    prompt deliveryFast delivery (3-5 days) with DHL Courier in Germany

    Choose your country
    Do you have a question ? We answer 7 days a week !
    Access to the data sheet
  • Fiber glass backing Abra Beta Smart

    Diameter 115

    Grit 40

    SINGLE-FLAP

    For use for a wide variety of not too heavy-duty machining operations on stainless steels, ferrous and non-ferrous metals.


    1,65 € 1,35 € + VAT * Order managed in 24h

    prompt deliveryFast delivery (3-5 days) with DHL Courier in Germany

    Choose your country
    Do you have a question ? We answer 7 days a week !
    Access to the data sheet
  • Nylon backing pad Abra Beta Smart

    Diameter 115

    Grit 40

    SINGLE-FLAP

    For use for a wide variety of not too heavy-duty machining operations on stainless steels, ferrous and non-ferrous metals.


    1,65 € 1,35 € + VAT * Order managed in 24h

    prompt deliveryFast delivery (3-5 days) with DHL Courier in Germany

    Choose your country
    Do you have a question ? We answer 7 days a week !
    Access to the data sheet
  • Nylon backing pad Abra Beta Silver
    CombinationsPricequantity
    2,03 €
    2,03 €

    Diameter 115

    Available with Grit 40 or 60

    SINGLE-FLAP

    For use for operations on stainless steels, ferrous and non-ferrous metals.

    Coarse grits are suitable for grinding and rough grinding operations, fine grits are particularly suitable for finishing operations.


    2,03 € 1,66 € + VAT * Order managed in 24h

    prompt deliveryFast delivery (3-5 days) with DHL Courier in Germany

    Choose your country
    Do you have a question ? We answer 7 days a week !
    Access to the data sheet
  • Fiber Glass backing pad Abra Beta Silver
    CombinationsPricequantity
    2,03 €
    2,03 €

    Diameter 115

    Available with Grit 40 or 60

    SINGLE-FLAP

    For use for operations on stainless steels, ferrous and non-ferrous metals.

    Coarse grits are suitable for grinding and rough grinding operations, fine grits are particularly suitable for finishing operations.


    2,03 € 1,66 € + VAT * Order managed in 24h

    prompt deliveryFast delivery (3-5 days) with DHL Courier in Germany

    Choose your country
    Do you have a question ? We answer 7 days a week !
    Access to the data sheet
  • Thinner cutting discs Abra Beta A36R Smart 230mm

    Abra Beta thin cutting disc, Smart economic line

    Disc geometry: Flat center.

    Diameter: 230

    Thickness: 2 mm

    Hole: 22.23 mm

    Grit: 36, Hardness R.

    Max RPM: 6600

    For universal use for cutting non-treated steels.

    Accurate and concentrated stock removal and consequently low power consumption of the power tool.
    Minimized burr formation.


    2,07 € 1,70 € + VAT * Order managed in 24h

    prompt deliveryFast delivery (3-5 days) with DHL Courier in Germany

    Choose your country
    Do you have a question ? We answer 7 days a week !
    Access to the data sheet
  • Thinner cutting discs Abra Beta INOX/STEEL A36Q 230mm Silver

    Thinner cutting discs for stainless steel/steel 

    Blade geometry: Depressed centre.

    Diameter: 230

    Thickness: 2mm

    Hole: 22.23mm

    Grit 36, Hardness Q

    Max RPM: 6600

    For universal use for cutting stainless steels, steel alloys and treated and non treated steels.

    The Silver disc range offers an excellent compromise between price and quality.

    The wide variety of products offered makes it particularly versatile and suitable for all machining operations requiring high performance.


    2,71 € 2,22 € + VAT * Order managed in 24h

    prompt deliveryFast delivery (3-5 days) with DHL Courier in Germany

    Choose your country
    Do you have a question ? We answer 7 days a week !
    Access to the data sheet
  • Glass fiber backing pad Abra Beta for aluminium
    CombinationsPricequantity
    2,92 €
    2,92 €

    Use for machining operations on aluminium, brass, bronze surfaces

    The treatment of the aluminium oxide cloth with stearate prevents problems of disc clogging and ensures a better discharge of machining waste.

    Cloth treated with grinding active additive to avoid overheating of the work surface.

    Grit: 40 and 60

    Diameter 115

    Single-flap


    2,92 € 2,39 € + VAT * Order managed in 24h

    prompt deliveryFast delivery (3-5 days) with DHL Courier in Germany

    Choose your country
    Do you have a question ? We answer 7 days a week !
    Access to the data sheet
  • Gass fiber backing pad Abra Beta for angles
    CombinationsPricequantity
    3,28 €
    3,42 €

    Professional discs that can be used for operations on stainless steels, ferrous and non-ferrous metals.

    Recommended for machining operations on shaped and angle surfaces.

    The greater flexibility of the “Soft” sheets allows a lower overheating of the Disc and assures a lower aggressiveness compared to the traditional disc.

    Available Diameter: 115 and 125mm

    Grit 40

    Single-flap

    ZIRCONIA CLOTH - Cotton backing pad


    3,28 € 2,69 € + VAT * Order managed in 24h

    prompt deliveryFast delivery (3-5 days) with DHL Courier in Germany

    Choose your country
    Do you have a question ? We answer 7 days a week !
    Access to the data sheet
  • Felt Flap Discs Abra Beta for polishing

    For use for polishing operations on all types of steel and stainless steel, combined with abrasive polishing pastes. Particularly suitable for operations on automotive bodywork.

    Diameter 115

    Single-flap

    GLASS FIBER BACKING PAD

    Flat profile


    7,13 € 5,84 € + VAT * Order managed in 24h

    prompt deliveryFast delivery (3-5 days) with DHL Courier in Germany

    Choose your country
    Do you have a question ? We answer 7 days a week !
    Access to the data sheet
  • Stripping discs

    For use for finishing and cleaning operations of the work surface.

    The texture of the disc prevents abrasive clogging during use.

    Diameter 115

    Bore 22


    7,13 € 5,84 € + VAT * Order managed in 24h

    prompt deliveryFast delivery (3-5 days) with DHL Courier in Germany

    Choose your country
    Do you have a question ? We answer 7 days a week !
    Access to the data sheet
  • Blade for band saw machine 1335X13X0,65

    Blade for band saw machine 1335X13X0,65

    Suitable for NEBES TM101 PLUS

    HSS M42.


    10,38 € 8,51 € + VAT * Order managed in 24h

    prompt deliveryFast delivery (3-5 days) with DHL Courier in Germany

    Choose your country
    Do you have a question ? We answer 7 days a week !
    Access to the data sheet
  • Blade for band saw machine 1440X13X0,65

    Blade for band saw machine 1440X13X0,65

    Suitable for NEBES TM125

    HSS M42.


    10,99 € 9,01 € + VAT * Order managed in 24h

    prompt deliveryFast delivery (3-5 days) with DHL Courier in Germany

    Choose your country
    Do you have a question ? We answer 7 days a week !
    Access to the data sheet
  • Blade for band saw machine 1735X13X0,90

    Blade for band saw machine 1735X13X0,90

    Suitable for NEBES TM176

    HSS M42.


    12,87 € 10,55 € + VAT * Order managed in 24h

    prompt deliveryFast delivery (3-5 days) with DHL Courier in Germany

    Choose your country
    Do you have a question ? We answer 7 days a week !
    Access to the data sheet
  • Angle grinder 800W Milwaukee AG 800-115 E

    Angle grinder 800W MILWAUKEE AG 800-115 E

    Powerful 800 Watt motor for various applications with only 2.0 kg of weight for comfortable use during longer working periods

    Very compact and slim body grip design with only 194 mm for most comfortable handling

    Line lock out function to prevent automatic start up after power breakdown

    Soft start for smooth start up

    Durable steel gears for long life time

    Protected air inlets for improved cooling

    Flat metal gear head for excellent visibility of workpiece, optimised cutting depth and work in restricted areas

    NO LOAD SPEED (RPM) 11500

    DISC DIAMETER (MM) 115

    MAX. CUTTING DEPTH (MM) 28

    WEIGHT (KG) 2

    BRAKE NO

    SWITCH TYPE Slide lock-on switch


    75,00 € 61,48 € + VAT * Order managed in 24h

    prompt deliveryFast delivery (3-5 days) with DHL Courier in Germany

    Choose your country
    Do you have a question ? We answer 7 days a week !
    Access to the data sheet
  • Angle grinder 1000W Milwaukee AG 10-125EK

    ANGLE GRINDER 1000W MILWAUKEE AG 10-125EK

    Powerful, 1000 W motor for strong performance in all applications

    Extreme compact design with an overall short length of 276 mm and 2.1 kg for most comfortable handling

    Line lock out function to prevent automatic start up after power breakdown

    Soft start for smooth start up

    Burst resistant and tool-free quick release safety guard for fast adjustment

    Ramped slide switch for easy start up, even when wearing gloves

    4 m cable

    NO LOAD SPEED (RPM) 11.000

    DISC DIAMETER (MM) 125

    MAX. CUTTING DEPTH (MM) 33

    WEIGHT (kg) 2.1

    BRAKE NO

    SWITCH TYPE Slide lock-on switch


    119,00 € 97,54 € + VAT * Order managed in 24h

    prompt deliveryFast delivery (3-5 days) with DHL Courier in Germany

    Choose your country
    Do you have a question ? We answer 7 days a week !
    Access to the data sheet
  • Angle grinder 2200W Milwaukee AG 22-230 DMS

    ANGLE GRINDER 2200W MILWAUKEE AG 22-230 DMS

    Powerful, 2200 W motor with powder field coating for long life time and outstanding performance in all applications

    Extreme compact design with an overall short length of 485 mm and 5.2 kg for most comfortable handling

    Burst resistant keyed safety guard

    External brush doors for easy access to the brushes for fast servicing

    NO LOAD SPEED (RPM) 6600

    DISC DIAMETER (MM) 230

    MAX. CUTTING DEPTH (MM) 68

    WEIGHT (kg) 5.2

    BRAKE NO

    Deadman switch


    152,50 € 125,00 € + VAT * Order managed in 24h

    prompt deliveryFast delivery (3-5 days) with DHL Courier in Germany

    Choose your country
    Do you have a question ? We answer 7 days a week !
    Access to the data sheet
  • Angle grinder 1250W Milwaukee AG 13-125 XSPD with slim paddle switch

    ANGLE GRINDER WITH SLIM PADDLE SWITCH 1250W MILWAUKEE AG 13-125 XSPD

    Powerful, 1250 W PROTECTOR-MOTOR with epoxy resin coated field and Heavy Duty winding protection for increased life time of tool

    Most compact design with only 160 mm body size for comfortable handling

    Integrated and innovative FIXTEC™ tool-free disc change system

    Burst resistant and tool-free quick release safety guard for fast adjustment

    4 m rubber cable

    NO LOAD SPEED (RPM) (giri/min) 12.000

    DISC DIAMETER (MM) 125

    MAX. CUTTING DEPTH (MM) 28

    Weight (kg) 2.3

    Brake NO

    SWITCH TYPE Paddle (Deadman) switch


    164,00 € 134,43 € + VAT * Order managed in 24h

    prompt deliveryFast delivery (3-5 days) with DHL Courier in Germany

    Choose your country
    Do you have a question ? We answer 7 days a week !
    Access to the data sheet
  • Angle grinder 1250W Milwaukee AGV 13-125XE with AVS

    ANGLE GRINDER WITH AVS AND SLIDE SWITCH 1250W MILWAUKEE AGV 13-125XE

    Powerful, 1250 W PROTECTOR-MOTOR with epoxy resin coated field and Heavy Duty winding protection for increased life time of tool

    Very compact and slim design for comfortable handling

    6 position variable speed selection from 2800 - 11,500 RPM´s for work with various materials

    Constant power electronics to provide constant speed under load

    Line lock out function to prevent automatic start up after power breakdown

    Overload protection to prevent overheating

    Safety clutch to protect the user from kickback injuries

    Integrated and innovative FIXTEC™ system for tool-free disc change

    Burst resistant and tool-free quick release safety guard for fast adjustment

    Anti-vibration side handle for less fatigue

    90° rotatable gear case

    4 m rubber cable

    NO LOAD SPEED (RPM) 2.800 - 11.500

    DISC DIAMETER (MM) 125

    MAX. CUTTING DEPTH (MM) 33

    Weight (kg) 2.4

    VARIABLE SPEED SI

    Brake NO

    SWITCH TYPE Slide lock-on switch


    179,00 € 146,72 € + VAT * Order managed in 24h

    prompt deliveryFast delivery (3-5 days) with DHL Courier in Germany

    Choose your country
    Do you have a question ? We answer 7 days a week !
    Access to the data sheet
  • Brushless percussion drill Milwaukee M18 BLPD2-0X only drill

    BRUSHLESS PERCUSSION DRILL M18 BLPD2-0X

    New brushless motor design delivers 40% more torque than previous model - up to 82 Nm

    Compact design (180 mm in length) provides excellent balance and control, ideal for overhead applications or work in tight spaces

    Advanced 13 mm heavy duty metal chuck for quick bit changes and superior bit retention

    REDLINK™ overload protection electronics in tool and battery pack deliver best in class system durability

    REDLITHIUM™ battery pack provides superior pack construction, electronics and fade-free performance to deliver more run time and more work over pack life

    Optimised speed for faster drilling & fastening (0 - 550/ 0 - 1800 rpm)

    On board fuel gauge and LED light

    All metal reversible belt clip to hang your tool quickly and easily

    Flexible battery system: works with all MILWAUKEE® M18 batteries

    Speed 1: 0 - 550 giri/min

    Speed 2: 0 - 1800 giri/min

    CHUCK CAPACITY (MM) 13mm

    MAX. DRILLING STEEL (MM) 13mm

    MAX. PERCUSSION RATE (BPM) 0 - 28.800 colpi/min

    MAX. TORQUE (NM) 82Nm

    WEIGHT WITH BATTERY PACK 2.1kg

    Supply with carry case HeavyDuty, without batteries, without charger.


    228,00 € 186,89 € + VAT * Order managed in 24h

    prompt deliveryFast delivery (3-5 days) with DHL Courier in Germany

    Choose your country
    Do you have a question ? We answer 7 days a week !
    Access to the data sheet
  • Compact brushless drill Milwaukee M18 CBLDD-202C

    Compact brushless drill Milwaukee M18 CBLDD-202C

    Compact brushless drill driver measuring 165 mm in length for access into tight spaces

    Advanced 13 mm heavy duty metal chuck for quick bit changes and superior bit retention

    60 Nm of torque - best power to size ratio

    REDLINK™ overload protection electronics in tool and battery pack deliver best in class system durability

    REDLITHIUM™ battery pack provides superior pack construction, electronics and fade-free performance to deliver more run time and more work over pack life

    All metal reversible belt clip to hang your tool quickly and easily

    On board fuel gauge and LED light

    Flexible battery system: works with all MILWAUKEE® M18 batteries

    Speed 1: 0 - 500 giri/min

    Speed 2: 0 - 1800 giri/min

    MAX. DRILLING STEEL (MM) 13mm

    CHUCK CAPACITY (MM) 13mm

    MAX. TORQUE (NM) 60Nm

    Weight with battery 1.5kg

    Complete with 2 x batteries M18 B2, charger M12 - 18 C, carry case.


    277,00 € 227,05 € + VAT * Order managed in 24h

    prompt deliveryFast delivery (3-5 days) with DHL Courier in Germany

    Choose your country
    Do you have a question ? We answer 7 days a week !
    Access to the data sheet
  • ½″ Compact impact wrench with friction ring MILWAUKEE M18 FIW2F12-0X only drill

    ½″ COMPACT IMPACT WRENCH WITH FRICTION RING MILWAUKEE M18 FIW2F12-0X

    Power efficiency under load - outstanding torque of 339 Nm

    Extremely compact design - total length of just 124 mm for access into tight spaces

    4-Mode DRIVE CONTROL allows the user to shift into four different speed and torque settings to maximise application versatility

    Bolt removal control delivers full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops

    Auto shut-off control applies no more than 34 Nm of torque for hand-tight fastening applications to prevent over tightening

    Tri-LEDs deliver high definition lighting to increase workspace visibility

    ½″ square friction ring

    Reversible belt hook

    The DNA of our FUEL™ platform redefines the balance of cordless technologies. MILWAUKEE®'s POWERSTATE™ brushless motor, REDLITHIUM™ battery pack and REDLINK PLUS™ electronic intelligence delivering  outstanding power, run time and durability

    Flexible battery system: works with all MILWAUKEE® M18 batteries

    NO LOAD SPEED (RPM)   0-900 / 0-1650 / 0-2400 / 0-1200

    IMPACT RATE (IPM)   0-1000 / 0-2400 / 0-3400

    TOOL RECEPTION 1/2'' square

    MAX. TORQUE (NM)   102 / 203 / 339 / 34

    WEIGHT WITH BATTERY PACK 1.8kg

    Equipped with carry case HeavyDuty, without batteries, without charger.


    291,00 € 238,52 € + VAT * Order managed in 24h

    prompt deliveryFast delivery (3-5 days) with DHL Courier in Germany

    Choose your country
    Do you have a question ? We answer 7 days a week !
    Access to the data sheet
  • Percussion drill Milwaukee M18 FPD3-0X only drill

    M18 FUEL™ PERCUSSION DRILL M18 FPD3-0X

    Higher power efficiency under load with outstanding torque of 158 Nm

    Extremely compact design of 175 mm length for access into tight spaces

    AUTOSTOP™ control mode offers enhanced safety for the operator by preventing over-rotation in a bind-up

    13 mm metal chuck for quick bit changes and bit retention

    Fastest drilling and driving applications under load

    Brighter LED workspace illumination

    Fuel gauge displays remaining charge

    All metal reversible belt clip to hang your tool quickly and easily

    Individual battery cell monitoring optimises tool run time and ensures long term pack durability

    The DNA of our FUEL™ platform redefines the balance of cordless technologies. MILWAUKEE®'s POWERSTATE™ brushless motor, REDLITHIUM™ battery pack and REDLINK PLUS™ electronic intelligence delivering  outstanding power, run time and durability

    Flexible battery system: works with all MILWAUKEE® M18 batteries

    NO LOAD SPEED GEAR 1 (RPM): 0 - 500

    NO LOAD SPEED GEAR 2 (RPM): 0 - 2100 giri/min

    CHUCK CAPACITY (MM) 13

    MAX. DRILLING WOOD (MM) 89

    MAX. DRILLING STEEL (MM) 16

    MAX. DRILLING MASONRY (MM) 16

    MAX. PERCUSSION RATE (BPM) 0 - 33,000

    MAX. TORQUE (NM) 158

    Supplied with HeavyDuty box, no batteries, no charger


    329,00 € 269,67 € + VAT * Order managed in 24h

    Free shipping !Free shipping

    prompt deliveryFast delivery (3-5 days) with DHL Courier in Germany

    Choose your country
    Do you have a question ? We answer 7 days a week !
    Access to the data sheet
  • 125 mm braking angle grinder with slide switch MILWAUKEE M18 FSAG125XB-0X only grinder

    125 MM BRAKING ANGLE GRINDER WITH SLIDE SWITCH MILWAUKEE M18 FSAG125XB-0X

    Delivering corded performance similar to a 1200 W grinder

    RAPIDSTOP™ for fastest disc brake in less than 2 seconds and best user protection

    Reduced gearhead size and lower angle of battery slot - for better balance & ergonomics compared to previous model

    Anti-vibration side handle for lower vibration

    Integrated FIXTEC™ system for tool-free wheel change

    Slim handle design

    Removable dust screen to prevent debris entrance, prolonging motor life

    125 mm keyless guard for great cutting capacity and fast guard adjustment without using a key

    Line-lock-out function to prevent automatic start up

    The DNA of our FUEL™ platform redefines the balance of cordless technologies. MILWAUKEE®'s POWERSTATE™ brushless motor, REDLITHIUM™ battery pack and REDLINK PLUS™ electronic intelligence delivering  outstanding power, run time and durability

    Flexible battery system: works with all MILWAUKEE® M18™ batteries

    Equipped with carry case HeavyDuty, without batteries, without charger.


    349,00 € 286,07 € + VAT * Order managed in 24h

    Free shipping !Free shipping

    prompt deliveryFast delivery (3-5 days) with DHL Courier in Germany

    Choose your country
    Do you have a question ? We answer 7 days a week !
    Access to the data sheet
  • 125 mm flathead braking angle grinder with slide switch MILWAUKEE M18 FSAGF125XB-0X only grinder

    125 MM FLATHEAD BRAKING ANGLE GRINDER WITH SLIDE SWITCH MILWAUKEE M18 FUEL M18 FSAGF125XB-0X

    Flat gear head design - allows user working within acute angles down to 42°

    Delivering corded performance similar to a 1200 W grinder

    RAPIDSTOP™ for fastest disc brake in less than 2 seconds and best user protection

    Anti-vibration side handle for lower vibration

    FIXTEC™ nut for tool-free wheel change

    Slim handle design

    Removable dust screen to prevent debris entrance, prolonging motor life

    125 mm keyless guard for great cutting capacity and fast guard adjustment without using a key

    Line-lock-out function to prevent automatic start up

    The DNA of our FUEL™ platform redefines the balance of cordless technologies. MILWAUKEE®'s POWERSTATE™ brushless motor, REDLITHIUM™ battery pack and REDLINK PLUS™ electronic intelligence delivering  outstanding power, run time and durability

    Flexible battery system: works with all MILWAUKEE® M18 batteries

    Equipped in carry case HeavyDuty, without batteries, without charger.


    372,00 € 304,92 € + VAT * Order managed in 24h

    Free shipping !Free shipping

    prompt deliveryFast delivery (3-5 days) with DHL Courier in Germany

    Choose your country
    Do you have a question ? We answer 7 days a week !
    Access to the data sheet
  • 125 mm variable speed & braking angle grinder with slide switch MILWAUKEE M18 FSAGV125XB-0X only grinder

    125 MM VARIABLE SPEED & BRAKING ANGLE GRINDER WITH SLIDE SWITCH MILWAUKEE M18 FSAGV125XB-0X

    Maximum control for every application - 5-step speed dial ideal for working with stainless steel and aluminum & for rust and paint removal

    Delivering corded performance similar to a 1200 W grinder

    RAPIDSTOP™ for fastest disc brake in less than 2 seconds and best user protection

    Anti-vibration side handle for lower vibration

    Integrated FIXTEC™ system for tool-free wheel change

    Slim handle design

    Removable dust screen to prevent debris entrance, prolonging motor life

    125 mm keyless guard for great cutting capacity and fast guard adjustment without using a key

    Line-lock-out function to prevent automatic start up

    The DNA of our FUEL™ platform redefines the balance of cordless technologies. MILWAUKEE®'s POWERSTATE™ brushless motor, REDLITHIUM™ battery pack and REDLINK PLUS™ electronic intelligence delivering  outstanding power, run time and durability

    Flexible battery system: works with all MILWAUKEE® M18 batteries

    Equipped with carry case HeavyDuty, without batteries, without charger.


    379,00 € 310,66 € + VAT * Order managed in 24h

    Free shipping !Free shipping

    prompt deliveryFast delivery (3-5 days) with DHL Courier in Germany

    Choose your country
    Do you have a question ? We answer 7 days a week !
    Access to the data sheet
  • ½″ High torque impact wrench with friction ring Milwaukee M18 FHIW2F12-0X only drill

    ½″ HIGH TORQUE IMPACT WRENCH WITH FRICTION RING M18 FUEL M18 FHIW2F12-0X

    Great power density: the M18 FUEL™ high torque impact wrench delivers 1491 Nm fastening torque and 2034 Nm of nut-busting torque in a compact size of 193 mm, which gives more access in tight spaces

    2000 RPMs of no load speed to perform your task 35% faster than with the previous gen

    Our battery isolation system provides a secure battery connection and controls vibration transmitted to the pack

    Robust gearcase for more durability

    Tri-LEDs deliver high-definition lighting to increase workspace visibility

    4-Mode DRIVE CONTROL allows the user to shift into four different speed and torque settings to maximise application versatility

    Mode 4 bolt removal, provides maximum nut-busting torque then shifts to 750 rpm for outstanding control when removing fasteners

    The DNA of our FUEL™ platform redefines the balance of cordless technologies. MILWAUKEE®'s POWERSTATE™ brushless motor, REDLITHIUM™ battery pack and REDLINK PLUS™ electronic intelligence delivering outstanding power, run time and durability

    Flexible battery system: works with all MILWAUKEE® M18™ batteries

    NO LOAD SPEED (RPM)   0-700/ 0-1300/ 0-2000/ 0-2000

    IMPACT RATE (IPM)   0-1300/ 0-2200/ 0-2400/ 0-2400

    TOOL RECEPTION 1/2'' square

    MAX. TORQUE (NM)   881 / 1220 / 1491 / 68

    NUT-BUSTING TORQUE (NM) 2034

    MAX. BOLT DIAMETER M36

    WEIGHT WITH BATTERY PACK 3.4kg

    Supplied with carry case HeavyDuty, without batterie, without charger.


    389,00 € 318,85 € + VAT * Order managed in 24h

    Free shipping !Free shipping

    prompt deliveryFast delivery (3-5 days) with DHL Courier in Germany

    Choose your country
    Do you have a question ? We answer 7 days a week !
    Access to the data sheet
  • ½″ Mid-torque impact wrench with friction ring Milwaukee M18 FMTIW2F12-0X only drill

    ½″ MID-TORQUE IMPACT WRENCH WITH FRICTION RING MILWAUKEE M18 FUEL M18 FMTIW2F12-0X

    Most versatile cordless impact wrench in the MILWAUKEE® impressive arsenal with an industry-leading performance at 881 Nm of nut-busting torque and 745 Nm of fastening torque

    Incredibly compact design for this performance level, with only 152 mm overall length ideal for applications in tight spaces

    4-Mode DRIVE CONTROL allows the user to shift into four different speed and torque settings to maximise application versatility

    Bolt removal control delivers full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops

    Auto shut-off control applies no more than 47 Nm of torque for hand-tight fastening applications to prevent over-tightening

    Tri-LEDs deliver high definition lighting to increase workspace visibility

    ½″ square friction ring

    Reversible belt hook

    The DNA of our FUEL™ platform redefines the balance of cordless technologies. MILWAUKEE®'s POWERSTATE™ brushless motor, REDLITHIUM™ battery pack and REDLINK PLUS™ electronic intelligence delivering  outstanding power, run time and durability

    Flexible battery system: works with all MILWAUKEE® M18 batteries

    NO LOAD SPEED (RPM)  0-1250 / 0-1950 / 0-2575 / 0-1325

    IMPACT RATE (IPM)   0-900 / 0-2100 / 0-3100

    TOOL RECEPTION 1/2'' square

    MAX. TORQUE (NM)   475 / 610 / 745 / 47

    MAX. BOLT DIAMETER M22

    WEIGHT WITH BATTERY PACK 2.3kg

    Equipped with carry case HeavyDuty, without batteries, without charger.


    393,00 € 322,13 € + VAT * Order managed in 24h

    Free shipping !Free shipping

    prompt deliveryFast delivery (3-5 days) with DHL Courier in Germany

    Choose your country
    Do you have a question ? We answer 7 days a week !
    Access to the data sheet
  • Brushless percussion drill Milwaukee M18 BLPD2-502X

    BRUSHLESS PERCUSSION DRILL M18 BLPD2-502X

    New brushless motor design delivers 40% more torque than previous model - up to 82 Nm

    Compact design (180 mm in length) provides excellent balance and control, ideal for overhead applications or work in tight spaces

    Advanced 13 mm heavy duty metal chuck for quick bit changes and superior bit retention

    REDLINK™ overload protection electronics in tool and battery pack deliver best in class system durability

    REDLITHIUM™ battery pack provides superior pack construction, electronics and fade-free performance to deliver more run time and more work over pack life

    Optimised speed for faster drilling & fastening (0 - 550/ 0 - 1800 rpm)

    On board fuel gauge and LED light

    All metal reversible belt clip to hang your tool quickly and easily

    Flexible battery system: works with all MILWAUKEE® M18 batteries

    Speed 1: 0 - 550 giri/min

    Speed 2: 0 - 1800 giri/min

    CHUCK CAPACITY (MM) 13mm

    MAX. DRILLING STEEL (MM) 13mm

    MAX. PERCUSSION RATE (BPM) 0 - 28.800 colpi/min

    MAX. TORQUE (NM) 82Nm

    WEIGHT WITH BATTERY PACK 2.1kg

    Complete with 2 batteries M18 B5, charger M12 - 18 FC, carry case HeavyDuty


    472,00 € 386,89 € + VAT * Order managed in 24h

    Free shipping !Free shipping

    prompt deliveryFast delivery (3-5 days) with DHL Courier in Germany

    Choose your country
    Do you have a question ? We answer 7 days a week !
    Access to the data sheet
  • 125 mm braking angle grinder with slide switch MILWAUKEE M18 FSAG125XB-502X

    125 MM BRAKING ANGLE GRINDER WITH SLIDE SWITCH MILWAUKEE M18 FUEL M18 FSAG125XB-502X

    Delivering corded performance similar to a 1200 W grinder

    RAPIDSTOP™ for fastest disc brake in less than 2 seconds and best user protection

    Reduced gearhead size and lower angle of battery slot - for better balance & ergonomics compared to previous model

    Anti-vibration side handle for lower vibration

    Integrated FIXTEC™ system for tool-free wheel change

    Slim handle design

    Removable dust screen to prevent debris entrance, prolonging motor life

    125 mm keyless guard for great cutting capacity and fast guard adjustment without using a key

    Line-lock-out function to prevent automatic start up

    The DNA of our FUEL™ platform redefines the balance of cordless technologies. MILWAUKEE®'s POWERSTATE™ brushless motor, REDLITHIUM™ battery pack and REDLINK PLUS™ electronic intelligence delivering  outstanding power, run time and durability

    Flexible battery system: works with all MILWAUKEE® M18 batteries

    Supplied with 2 batteries M18 B5, charger M12-18 FC, carry case HeavyDuty 


    499,00 € 409,02 € + VAT * Order managed in 24h

    Free shipping !Free shipping

    prompt deliveryFast delivery (3-5 days) with DHL Courier in Germany

    Choose your country
    Do you have a question ? We answer 7 days a week !
    Access to the data sheet
  • 125 mm variable speed & braking angle grinder with slide switch MILWAUKEE M18 FSAGV125XB-502X

    125 MM VARIABLE SPEED & BRAKING ANGLE GRINDER WITH SLIDE SWITCH MILWAUKEE FSAGV125XB-502X

    Maximum control for every application - 5-step speed dial ideal for working with stainless steel and aluminum & for rust and paint removal

    Delivering corded performance similar to a 1200 W grinder

    RAPIDSTOP™ for fastest disc brake in less than 2 seconds and best user protection

    Anti-vibration side handle for lower vibration

    Integrated FIXTEC™ system for tool-free wheel change

    Slim handle design

    Removable dust screen to prevent debris entrance, prolonging motor life

    125 mm keyless guard for great cutting capacity and fast guard adjustment without using a key

    Line-lock-out function to prevent automatic start up

    The DNA of our FUEL™ platform redefines the balance of cordless technologies. MILWAUKEE®'s POWERSTATE™ brushless motor, REDLITHIUM™ battery pack and REDLINK PLUS™ electronic intelligence delivering  outstanding power, run time and durability

    Flexible battery system: works with all MILWAUKEE® M18 batteries

    Supplied with 2 batteries M18 B5, charger M12-18 FC, carry case HeavyDuty 


    539,00 € 441,80 € + VAT * Order managed in 24h

    Free shipping !Free shipping

    prompt deliveryFast delivery (3-5 days) with DHL Courier in Germany

    Choose your country
    Do you have a question ? We answer 7 days a week !
    Access to the data sheet
  • Band saw machine Nebes TM101 Plus

    NEBES TM101 PLUS

    Band saw machine Nebes Tm101 Plus.

    Aluminium structure, Adjustable cutting angle ranging from 0° to 45°.

    Continuous cutting speed change
    Arc-shaped body frame locking device making the structure easy to transport
    Overdimensioned piece locking vice made from cast iron and aluminium, with steel inserts
    Base with non-scratch feet
    Like all Nebes sawing machines, this machine is also equipped with cast iron pulleys: dry cutting or cutting
    process by means of lubro-refrigerant sprayers.

    Cutting capacity diameter: 105mm

    Cutting speed from 30 to 80 m/min.

    Blade size 1335x13x0.65

    Installation power 1.01kw

    Weight 21.5 kg.

    Dimensions 73x38x45


    543,00 € 445,08 € + VAT * Order managed in 24h

    Free shipping !Free shipping

    prompt deliveryFast delivery (3-5 days) with DHL Courier in Germany

    Choose your country
    Do you have a question ? We answer 7 days a week !
    Access to the data sheet
  • 125 mm flathead braking angle grinder with slide switch MILWAUKEE M18 FSAGF125XB-502X

    125 MM FLATHEAD BRAKING ANGLE GRINDER WITH SLIDE SWITCH MILWAUKEE M18 FUEL M18 FSAGF125XB-502X

    Flat gear head design - allows user working within acute angles down to 42°

    Delivering corded performance similar to a 1200 W grinder

    RAPIDSTOP™ for fastest disc brake in less than 2 seconds and best user protection

    Anti-vibration side handle for lower vibration

    FIXTEC™ nut for tool-free wheel change

    Slim handle design

    Removable dust screen to prevent debris entrance, prolonging motor life

    125 mm keyless guard for great cutting capacity and fast guard adjustment without using a key

    Line-lock-out function to prevent automatic start up

    The DNA of our FUEL™ platform redefines the balance of cordless technologies. MILWAUKEE®'s POWERSTATE™ brushless motor, REDLITHIUM™ battery pack and REDLINK PLUS™ electronic intelligence delivering  outstanding power, run time and durability

    Flexible battery system: works with all MILWAUKEE® M18 batteries

    Supplied with 2 batteries M18 B5, charger M12-18 FC, carry case HeavyDuty 


    549,00 € 450,00 € + VAT * Order managed in 24h

    Free shipping !Free shipping

    prompt deliveryFast delivery (3-5 days) with DHL Courier in Germany

    Choose your country
    Do you have a question ? We answer 7 days a week !
    Access to the data sheet
  • Percussion drill Milwaukee M18 FPD3-502X

    M18 FUEL™ PERCUSSION DRILL M18 FPD3-502X

    Higher power efficiency under load with outstanding torque of 158 Nm

    Extremely compact design of 175 mm length for access into tight spaces

    AUTOSTOP™ control mode offers enhanced safety for the operator by preventing over-rotation in a bind-up

    13 mm metal chuck for quick bit changes and bit retention

    Fastest drilling and driving applications under load

    Brighter LED workspace illumination

    Fuel gauge displays remaining charge

    All metal reversible belt clip to hang your tool quickly and easily

    Individual battery cell monitoring optimises tool run time and ensures long term pack durability

    The DNA of our FUEL™ platform redefines the balance of cordless technologies. MILWAUKEE®'s POWERSTATE™ brushless motor, REDLITHIUM™ battery pack and REDLINK PLUS™ electronic intelligence delivering  outstanding power, run time and durability

    Flexible battery system: works with all MILWAUKEE® M18 batteries

    NO LOAD SPEED GEAR 1 (RPM): 0 - 500

    NO LOAD SPEED GEAR 2 (RPM): 0 - 2100 giri/min

    CHUCK CAPACITY (MM) 13

    MAX. DRILLING WOOD (MM) 89

    MAX. DRILLING STEEL (MM) 16

    MAX. DRILLING MASONRY (MM) 16

    MAX. PERCUSSION RATE (BPM) 0 - 33,000

    MAX. TORQUE (NM) 158

    Supplied with 2 batteries M18 B5, fast charger M12 - 18 FC, HeavyDuty box


    597,00 € 489,34 € + VAT * Order managed in 24h

    Free shipping !Free shipping

    prompt deliveryFast delivery (3-5 days) with DHL Courier in Germany

    Choose your country
    Do you have a question ? We answer 7 days a week !
    Access to the data sheet
  • ½″ Mid-torque impact wrench with friction ring Milwaukee M18 FMTIW2F12-502X

    ½″ MID-TORQUE IMPACT WRENCH WITH FRICTION RING MILWAUKEE M18 FMTIW2F12-502X

    Most versatile cordless impact wrench in the MILWAUKEE® impressive arsenal with an industry-leading performance at 881 Nm of nut-busting torque and 745 Nm of fastening torque

    Incredibly compact design for this performance level, with only 152 mm overall length ideal for applications in tight spaces

    4-Mode DRIVE CONTROL allows the user to shift into four different speed and torque settings to maximise application versatility

    Bolt removal control delivers full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops

    Auto shut-off control applies no more than 47 Nm of torque for hand-tight fastening applications to prevent over-tightening

    Tri-LEDs deliver high definition lighting to increase workspace visibility

    ½″ square friction ring

    Reversible belt hook

    The DNA of our FUEL™ platform redefines the balance of cordless technologies. MILWAUKEE®'s POWERSTATE™ brushless motor, REDLITHIUM™ battery pack and REDLINK PLUS™ electronic intelligence delivering  outstanding power, run time and durability

    Flexible battery system: works with all MILWAUKEE® M18 batteries

    NO LOAD SPEED (RPM)  0-1250 / 0-1950 / 0-2575 / 0-1325

    IMPACT RATE (IPM)   0-900 / 0-2100 / 0-3100

    TOOL RECEPTION 1/2'' square

    MAX. TORQUE (NM)   475 / 610 / 745 / 47

    MAX. BOLT DIAMETER M22

    WEIGHT WITH BATTERY PACK 2.3kg

    Equipped with 2 batteries M18 B5, charger M12 - 18 FC, carry case HeavyDuty


    619,00 € 507,38 € + VAT * Order managed in 24h

    Free shipping !Free shipping

    prompt deliveryFast delivery (3-5 days) with DHL Courier in Germany

    Choose your country
    Do you have a question ? We answer 7 days a week !
    Access to the data sheet
  • ½″ Compact impact wrench with friction ring MILWAUKEE M18 FIW2F12-502X

    ½″ COMPACT IMPACT WRENCH WITH FRICTION RING MILWAUKEE M18 FIW2F12-502X

    Power efficiency under load - outstanding torque of 339 Nm

    Extremely compact design - total length of just 124 mm for access into tight spaces

    4-Mode DRIVE CONTROL allows the user to shift into four different speed and torque settings to maximise application versatility

    Bolt removal control delivers full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops

    Auto shut-off control applies no more than 34 Nm of torque for hand-tight fastening applications to prevent over tightening

    Tri-LEDs deliver high definition lighting to increase workspace visibility

    ½″ square friction ring

    Reversible belt hook

    The DNA of our FUEL™ platform redefines the balance of cordless technologies. MILWAUKEE®'s POWERSTATE™ brushless motor, REDLITHIUM™ battery pack and REDLINK PLUS™ electronic intelligence delivering  outstanding power, run time and durability

    Flexible battery system: works with all MILWAUKEE® M18 batteries

    NO LOAD SPEED (RPM)   0-900 / 0-1650 / 0-2400 / 0-1200

    IMPACT RATE (IPM)   0-1000 / 0-2400 / 0-3400

    TOOL RECEPTION 1/2'' square

    MAX. TORQUE (NM)   102 / 203 / 339 / 34

    WEIGHT WITH BATTERY PACK 1.8kg

    Equipped with 2 batteries M18 B5, charger M12 - 18 FC, carry case HeavyDuty


    623,00 € 510,66 € + VAT * Order managed in 24h

    Free shipping !Free shipping

    prompt deliveryFast delivery (3-5 days) with DHL Courier in Germany

    Choose your country
    Do you have a question ? We answer 7 days a week !
    Access to the data sheet
  • Drill press with drive belt FERVI 0012

    DRILL PRESS WITH DRIVE BELT FERVI

    INCLINABLE AND ROTATING TABLE. ELECTRICAL SYSTEM WITH SEPARATE 24V CIRCUIT FOR ON-BOARD MACHINE CONTROLS.

    Included in the price:

    -Keyless chuck 1-16 mm B16

    -Drill chuck arbor MT 2 B16

    Technical specifications:

    Max drilling capacity on cast iron with pre-drilling holeØ 20 m

    Max drilling capacity on steel with pre-drilling hole(s235jr)Ø 16 mm

    Continuous drilling capacityØ 12 mm

    Chuck sizes1 - 16 mm B16

    Approx spindle speeds(12) 280 ÷ 2380 rpm

    Spindle travel80 mm

    Quillø 40 mm

    Columnø 72 mm

    Height990 mm

    Distance spindle axis - column surface160 mm

    Distance between spindle nose and table435 mm

    Distance between spindle nose and base650 mm

    Table dimensionsø 290 mm

    Single-phase motor230 V 50 Hz 0,65 kW

    Net weight48 kg


    624,00 € 511,48 € + VAT * Order managed in 24h

    Free shipping !Free shipping

    prompt deliveryFast delivery (3-5 days) with DHL Courier in Germany

    Choose your country
    Do you have a question ? We answer 7 days a week !
    Access to the data sheet
  • Band saw machine Nebes TM125 Inverter

    NEBES TM125 INVERTER

    Band saw machine Nebes Tm125 inverter

    Aluminium structure, Adjustable cutting angle ranging from 0° to 60°
    Electronic variable speed and thermal protection, preventing eventual motor overload.

    Quick-clamping arc device for an easier trasportation
    Extra large vise in cast iron and aluminum with steel facings.

    Anti-scratch base with rubber feet.
    Cast iron pulleys without rubber facings makes them everlasting.
    Double conic ball bearings and eccentric flange for maximum cutting precision.

    Cutting capacity diameter: 125mm

    Cutting speed from 30 to 80 m/min.

    Installation power 1.01kw

    Blade dimensions 1440x13x0.65

    Weight 22 kg.

    Dimensions 73x38x45


    639,00 € 523,77 € + VAT * Order managed in 24h

    Free shipping !Free shipping

    prompt deliveryFast delivery (3-5 days) with DHL Courier in Germany

    Choose your country
    Do you have a question ? We answer 7 days a week !
    Access to the data sheet
  • ½″ High torque impact wrench with friction ring Milwaukee M18 FHIW2F12-502X

    ½″ HIGH TORQUE IMPACT WRENCH WITH FRICTION RING M18 FHIWF12-502X

    Great power density: the M18 FUEL™ high torque impact wrench delivers 1491 Nm fastening torque and 2034 Nm of nut-busting torque in a compact size of 193 mm, which gives more access in tight spaces

    2000 RPMs of no load speed to perform your task 35% faster than with the previous gen

    Our battery isolation system provides a secure battery connection and controls vibration transmitted to the pack

    Robust gearcase for more durability

    Tri-LEDs deliver high-definition lighting to increase workspace visibility

    4-Mode DRIVE CONTROL allows the user to shift into four different speed and torque settings to maximise application versatility

    Mode 4 bolt removal, provides maximum nut-busting torque then shifts to 750 rpm for outstanding control when removing fasteners

    The DNA of our FUEL™ platform redefines the balance of cordless technologies. MILWAUKEE®'s POWERSTATE™ brushless motor, REDLITHIUM™ battery pack and REDLINK PLUS™ electronic intelligence delivering outstanding power, run time and durability

    Flexible battery system: works with all MILWAUKEE® M18™ batteries

    NO LOAD SPEED (RPM)   0-700/ 0-1300/ 0-2000/ 0-2000

    IMPACT RATE (IPM)   0-1300/ 0-2200/ 0-2400/ 0-2400

    TOOL RECEPTION 1/2'' square

    MAX. TORQUE (NM)   881 / 1220 / 1491 / 68

    NUT-BUSTING TORQUE (NM) 2034

    MAX. BOLT DIAMETER M36

    WEIGHT WITH BATTERY PACK 3.4kg

    Equipped with 2 batteries M18 B5, charger M12 - 18 FC, carry case HeavyDuty


    669,00 € 548,36 € + VAT

    Available from 07-03

    * Order managed in 24h

    Free shipping !Free shipping

    prompt deliveryFast delivery (3-5 days) with DHL Courier in Germany

    Choose your country
    Do you have a question ? We answer 7 days a week !
    Access to the data sheet
  • Radial drill press FERVI 0757

    RADIAL DRILL PRESS WITH DRIVE BELT FERVI

    ROTATING AND TILTING TABLE WITH DOUBLE ARM, TILTING HEAD, ELECTRICAL SYSTEM WITH SEPARATE 24V CIRCUIT FOR ON-BOARD MACHINE CONTROLS.

    Included in the price: 

    -Keyless chuck 1-16mm/B16

    -Drill chuck shank MT 2

    Technical specifications:

    Max drilling capacity on cast iron with pre-drilling holeØ 20 mm

    Max drilling capacity on steel with pre-drilling hole(s235jr)Ø 16 mm

    Continuous drilling capacityØ 12 mm

    Spindle taperCM 2

    Chuck sizes1 - 16 mm B16

    Approx spindle speeds(12) 300 ÷ 2550 rpm

    Spindle travel65 mm

    Quillø 40 mm

    Columnø 72 mm

    Sliding travel280 mm

    Head tilt left and right90º L ; 45º R

    Height810 mm

    Distance chuck-column375 mm

    Distance between spindle nose and base505 mm

    Table dimensionsø 290 mm

    Tilting table± 45°

    Single-phase motor230 V 50 Hz 0,375 kW

    Dimensions950 x 300 x 810h mm

    Net weight46 kg


    699,00 € 572,95 € + VAT * Order managed in 24h

    Free shipping !Free shipping

    prompt deliveryFast delivery (3-5 days) with DHL Courier in Germany

    Choose your country
    Do you have a question ? We answer 7 days a week !
    Access to the data sheet
  • Drill press with drive belt FERVI 0242

    DRILL PRESS WITH DRIVE BELT FERVI

    NEW BELT TENSION DEVICE, DRILLING DEPTH READOUT, LED LIGHT INCLUDED, ROTATING AND INCLINABLE TABLE. ELECTRICAL SYSTEM WITH SEPARATE 24V CIRCUIT FOR ON-BOARD MACHINE CONTROLS.

    Included with the price:

    -Keyless chuck 1-16mm B18

    -Drill chuck shank MT 2

    Technical specification:

    Max drilling capacity on cast iron with pre-drilling holeØ 25 mm

    Max drilling capacity on steel with pre-drilling hole(s235jr)Ø 20 mm

    Continuous drilling capacityØ 16 mm

    Spindle taperCM 2

    Chuck sizes1 - 16 mm B18

    Approx spindle speeds(16) 180 ÷ 2770 rpm

    Spindle travel85 mm

    Quillø 47 mm

    Columnø 72 mm

    Height990 mm

    Distance chuck-column180 mm

    Distance between spindle nose and table420 mm

    Distance between spindle nose and base600 mm

    Table dimensions305 x 305 mm

    Slot16 mm

    Tilting table± 45°

    Single-phase motor230 V 50 Hz 0,75 kW

    Net weight60 kg


    839,00 € 687,70 € + VAT * Order managed in 24h

    Free shipping !Free shipping

    prompt deliveryFast delivery (3-5 days) with DHL Courier in Germany

    Choose your country
    Do you have a question ? We answer 7 days a week !
    Access to the data sheet

Products by page



Do you have a question ?
We answer by email 7 days a Week !
8-12 / 14-18 hours at the fixed number +390444 1466709




Close

You have added this product to your cart.

Keep shopping

Newsletter

Restez informé de nos nouveautés, nos promotions..