Free shipping on purchases over 300€

Online support / Phone
Email : info@top-welding.com

Choose your country Germany

€ (EUR)

No products

0,00 € Shipping
0,00 € Total

Check out

  • Your Account
Drill presses


Column and bench drills at the best price on Top-welding Germany

Choose your country
There are 12 products in category Drill presses.


  • Drill press with drive belt FERVI 0012

    DRILL PRESS WITH DRIVE BELT FERVI

    INCLINABLE AND ROTATING TABLE. ELECTRICAL SYSTEM WITH SEPARATE 24V CIRCUIT FOR ON-BOARD MACHINE CONTROLS.

    Included in the price:

    -Keyless chuck 1-16 mm B16

    -Drill chuck arbor MT 2 B16

    Technical specifications:

    Max drilling capacity on cast iron with pre-drilling holeØ 20 m

    Max drilling capacity on steel with pre-drilling hole(s235jr)Ø 16 mm

    Continuous drilling capacityØ 12 mm

    Chuck sizes1 - 16 mm B16

    Approx spindle speeds(12) 280 ÷ 2380 rpm

    Spindle travel80 mm

    Quillø 40 mm

    Columnø 72 mm

    Height990 mm

    Distance spindle axis - column surface160 mm

    Distance between spindle nose and table435 mm

    Distance between spindle nose and base650 mm

    Table dimensionsø 290 mm

    Single-phase motor230 V 50 Hz 0,65 kW

    Net weight48 kg


    624,00 € 511,48 € + VAT * Order managed in 24h

    Free shipping !Free shipping

    prompt deliveryFast delivery (3-5 days) with DHL Courier in Germany

    Choose your country
    Do you have a question ? We answer 7 days a week !
    Access to the data sheet
  • Radial drill press FERVI 0757

    RADIAL DRILL PRESS WITH DRIVE BELT FERVI

    ROTATING AND TILTING TABLE WITH DOUBLE ARM, TILTING HEAD, ELECTRICAL SYSTEM WITH SEPARATE 24V CIRCUIT FOR ON-BOARD MACHINE CONTROLS.

    Included in the price: 

    -Keyless chuck 1-16mm/B16

    -Drill chuck shank MT 2

    Technical specifications:

    Max drilling capacity on cast iron with pre-drilling holeØ 20 mm

    Max drilling capacity on steel with pre-drilling hole(s235jr)Ø 16 mm

    Continuous drilling capacityØ 12 mm

    Spindle taperCM 2

    Chuck sizes1 - 16 mm B16

    Approx spindle speeds(12) 300 ÷ 2550 rpm

    Spindle travel65 mm

    Quillø 40 mm

    Columnø 72 mm

    Sliding travel280 mm

    Head tilt left and right90º L ; 45º R

    Height810 mm

    Distance chuck-column375 mm

    Distance between spindle nose and base505 mm

    Table dimensionsø 290 mm

    Tilting table± 45°

    Single-phase motor230 V 50 Hz 0,375 kW

    Dimensions950 x 300 x 810h mm

    Net weight46 kg


    699,00 € 572,95 € + VAT * Order managed in 24h

    Free shipping !Free shipping

    prompt deliveryFast delivery (3-5 days) with DHL Courier in Germany

    Choose your country
    Do you have a question ? We answer 7 days a week !
    Access to the data sheet
  • Drill press with drive belt FERVI 0242

    DRILL PRESS WITH DRIVE BELT FERVI

    NEW BELT TENSION DEVICE, DRILLING DEPTH READOUT, LED LIGHT INCLUDED, ROTATING AND INCLINABLE TABLE. ELECTRICAL SYSTEM WITH SEPARATE 24V CIRCUIT FOR ON-BOARD MACHINE CONTROLS.

    Included with the price:

    -Keyless chuck 1-16mm B18

    -Drill chuck shank MT 2

    Technical specification:

    Max drilling capacity on cast iron with pre-drilling holeØ 25 mm

    Max drilling capacity on steel with pre-drilling hole(s235jr)Ø 20 mm

    Continuous drilling capacityØ 16 mm

    Spindle taperCM 2

    Chuck sizes1 - 16 mm B18

    Approx spindle speeds(16) 180 ÷ 2770 rpm

    Spindle travel85 mm

    Quillø 47 mm

    Columnø 72 mm

    Height990 mm

    Distance chuck-column180 mm

    Distance between spindle nose and table420 mm

    Distance between spindle nose and base600 mm

    Table dimensions305 x 305 mm

    Slot16 mm

    Tilting table± 45°

    Single-phase motor230 V 50 Hz 0,75 kW

    Net weight60 kg


    839,00 € 687,70 € + VAT * Order managed in 24h

    Free shipping !Free shipping

    prompt deliveryFast delivery (3-5 days) with DHL Courier in Germany

    Choose your country
    Do you have a question ? We answer 7 days a week !
    Access to the data sheet
  • Floor drill press Fervi 0754/230V

    FLOOR DRILL PRESS WITH DRIVE BELT FERVI

    INCLINABLE TABLE. ELECTRICAL SYSTEM WITH SEPARATE 24V CIRCUIT FOR ON-BOARD MACHINE CONTROLS.

    Included in the price:

    -Keyless chuck 5-20mm B22

    -Drill chuck shank MT 4

    Technical specifications:

    Max drilling capacity on cast iron with pre-drilling hole: Ø 32 mm

    Max drilling capacity on steel with pre-drilling hole(s235jr): Ø 28 mm

    Continuous drilling capacity: Ø 20 mm

    Spindle taper: MT 4

    Chuck sizes: 5-20 mm B22

    Approx spindle speeds: (12) 150 ÷ 2450 rpm

    Spindle travel: 120 mm

    Quill: ø 62 mm

    Column: ø 92 mm

    Height: 1710 mm

    Distance column-chuck260 mm

    Table dimensions460 x 425 mm

    Slot: 14 mm

    Tilting table± 45°

    Single-phase motor: 230 V 50 Hz 1,5 kW

    Net weight125 kg


    1 459,00 € 1 195,90 € + VAT * Order managed in 24h

    Free shipping !Free shipping

    prompt deliveryFast delivery (3-5 days) with DHL Courier in Germany

    Choose your country
    Do you have a question ? We answer 7 days a week !
    Access to the data sheet
  • Floor drill Press FERVI 0252

    Floor drill press with drive belt FERVI

    NEW BELT TENSION DEVICE, REVERSIBLE TABLE WITH INTEGRATED SLIDING VICE , DRILLING DEPTH READOUT, LED LIGHT INCLUDED. ELECTRICAL SYSTEM WITH SEPARATE 24V CIRCUIT FOR ON-BOARD MACHINE CONTROLS.

    Included in the price:

    -Keyless chuck 1

    -Drill chuck shank MT 4

    Technical specification:

    Max drilling capacity on cast iron with pre-drilling hole: Ø 32 mm

    Max drilling capacity on steel with pre-drilling hole(s235jr)Ø 28 mm

    Continuous drilling capacityØ 20 mm

    Spindle taper4

    Spindle taper1 - 16 mm B18

    Approx spindle speeds(12) 150 ÷ 2450 rpm

    Spindle travel120 mm

    Quillø 62 mm

    Columnø 92 mm

    Height1720 mm

    Distance chuck-column255 mm

    Distance between spindle nose and table700 mm

    Table dimensions460 x 425 mm

    Distance between spindle nose and base1220 mm

    Slot14 mm

    Vice210 x 165 mm

    Single-phase motor230 V 50 Hz 1,5 kW

    Net weight135 kg


    1 728,00 € 1 416,39 € + VAT * Order managed in 24h

    Free shipping !Free shipping

    prompt deliveryFast delivery (3-5 days) with DHL Courier in Germany

    Choose your country
    Do you have a question ? We answer 7 days a week !
    Access to the data sheet
  • Floor drill press FERVI T032

    FLOOR DRILL PRESS WITH DRIVE BELT

    PARTIALLY ROTATING TABLE, WITH 125MM VICE.

    Included the price:

    -Drill chuck with key 1-16 B18

    -Spindle drilled MT 3

    -Reduction sleeve MT 3/2

    Technical specifications:

    Max drilling capacity on cast iron with pre-drilling holeØ 31,75 mm

    Max drilling capacity on steel with pre-drilling hole(s235jr)Ø 31,75 mm

    Spindle taperCM 3

    Continuous drilling capacityØ 25 mm

    Chuck sizes1 ÷ 16 B18

    Approx spindle speeds(9) 160 ÷ 1880 rpm

    Spindle travel130 mm

    ColumnØ 102 mm

    Distance between spindle axis and column230 mm

    Distance between spindle nose and table700 mm

    Distance between spindle nose and base1175 mm

    Table dimensions330 x 380 mm

    Travel of table670 mm

    Slot14 mm

    Base dimensions300 x 325 mm

    Motor: 400V 50Hz 1,5 kW

    Overall sizes900 x 430 x 1760 mm

    Net weight280 kg


    2 760,00 € 2 262,30 € + VAT * Order managed in 24h

    Free shipping !Free shipping

    prompt deliveryFast delivery (3-5 days) with DHL Courier in Germany

    Choose your country
    Do you have a question ? We answer 7 days a week !
    Access to the data sheet
  • Floor drill press FERVI T032DA

    FLOOR DRILL PRESS WITH DRIVE BELT FERVI

    WITH AUTOFEE, COOLANT SYSTEM, PARTIALLY ROTATING TABLE, WITH 125MM VICE.

    Suitable for tapping.

    Included in the price:

    -Drill chuck with key 1÷16 B18

    -Spindle drilled MT 3

    -Reduction sleeve MT 3/2

    Technical specifications:

    Max drilling capacity on cast iron with pre-drilling holeØ 31,75 mm

    Max drilling capacity on steel with pre-drilling hole(s235jr)Ø 31,75 mm

    Continuous drilling capacityØ 25 mm

    Spindle taper: MT 3

    Chuck sizes1 ÷ 16 B18

    Approx spindle speeds(8) 160 ÷ 2200 rpm

    Spindle travel130 mm

    ColumnØ 115 mm

    Feed range0,1- 0,16- 0,26 mm/giro

    Distance between spindle axis and column223 mm

    Distance between spindle nose and table696 mm

    Distance between spindle nose and base1135 mm

    Table dimensions400 x 470 mm

    Travel of table510 mm

    Slot14 mm

    Base dimensions400 x 310 mm

    Motor: 400 V 50 Hz 0,85 kW / 1,1 kW

    Cooling pump400 V 50 Hz 40 W

    Overall sizes900 x 545 x 1765 mm

    Net weight340 kg


    3 410,00 € 2 795,08 € + VAT * Order managed in 24h

    Free shipping !Free shipping

    prompt deliveryFast delivery (3-5 days) with DHL Courier in Germany

    Choose your country
    Do you have a question ? We answer 7 days a week !
    Access to the data sheet
  • Geared drilling milling machine FERVI T044/230V

    GEARED DRILLING MILLING MACHINE FERVI

    SQUARE COLUMN AND DOVETAIL GUIDES, TIMED REVERSING, TAPPING.

    Included in the price:

    -Chuck with key 1 ÷ 16 B16

    -Drill chuck shank MT 4 B16

    -Spindle taper shank MT 4 ø27 mm

    -Reduction sleeve MT 4/3

    -Reduction sleeve MT 3/2

    -Oilers

    -Tie rod M16

    -Service keys

    Technical specifications:

    Max drilling capacity on cast iron with pre-drilling holeø 40 mm

    Max drilling capacity on steel with pre-drilling hole(s235jr)ø 45 mm

    Face milling cutter maxø 80 mm
    End milling capacityø 32 mm
    Tapping capacityø 22 mm
    Spindle taper CM 4
    Chuck sizes1 - 13 mm B16
    Approx spindle speeds(6) 95 ÷ 1600 rpm
    Spindle travel120 mm
    Spindle rotationDx - Sx
    Quillø 75 mm
    Head tilt left and right± 60º
    Manual vertical feed division0,02 mm
    Distance between chuck and column240 mm
    Max distance spindle nose - table460 mm
    Table dimensions800 x 240 mm
    Slot14 mm
    Longitudinal axis560 mm
    Cross axis190 mm
    Base dimensions405 x 630 mm
    Single-phase motor230 V 50 Hz 1,5 kW
    Net weight300 kg

    3 835,00 € 3 143,44 € + VAT * Order managed in 24h

    Free shipping !Free shipping

    prompt deliveryFast delivery (3-5 days) with DHL Courier in Germany

    Choose your country
    Do you have a question ? We answer 7 days a week !
    Access to the data sheet
  • Geared drilling milling machine FERVI T044/400V

    GEARED DRILLING MILLING MACHINE FERVI

    SQUARE COLUMN AND DOVETAIL GUIDES, TIMED REVERSING, TAPPING.

    Included in the price:

    -Chuck with key 1 ÷ 16 B16

    -Drill chuck shank MT 4 B16

    -Spindle taper shank MT 4 ø27 mm

    -Reduction sleeve MT 4/3

    -Reduction sleeve MT 3/2

    -Oilers

    -Tie rod M16

    -Service keys

    Technical specifications:

    Max drilling capacity on cast iron with pre-drilling hole: ø 40 mm

    Max drilling capacity on steel with pre-drilling hole(s235jr): ø 45 mm

    Face milling cutter max: ø 80 mm
    End milling capacity: ø 32 mm
    Tapping capacity: ø 22 mm
    Spindle taper CM 4
    Chuck sizes: 1 - 13 mm B16
    Approx spindle speeds: (6) 95 ÷ 1600 rpm
    Spindle travel: 120 mm
    Spindle rotation: Dx - Sx
    Quill: ø 75 mm
    Head tilt left and right: ± 60º
    Manual vertical feed division: 0,02 mm
    Distance between chuck and column: 240 mm
    Max distance spindle nose - table: 460 mm
    Table dimensions: 800 x 240 mm
    Slot: 14 mm
    Longitudinal axis: 560 mm
    Cross axis: 190 mm
    Base dimensions: 405 x 630 mm
    Motor: 400 V 50 Hz 1,5 kW
    Net weight: 300 kg

    3 835,00 € 3 143,44 € + VAT * Order managed in 24h

    Free shipping !Free shipping

    prompt deliveryFast delivery (3-5 days) with DHL Courier in Germany

    Choose your country
    Do you have a question ? We answer 7 days a week !
    Access to the data sheet
  • Geared drilling machine FERVI T041DA

    GEARED DRILLING MACHINE FERVI

    REVERSIBLE, TILTING HEAD, COOLING SYSTEM, TIMED TAPPING AND AUTOMATIC DOWN FEED, ROTATING TABLE.

    Included in the price:

    -Keyless chuck 1-16 B16

    -Drill chuck shank MT 4

    -Reduction sleeve MT 4/3

    -Reduction sleeve MT 3/2

    Technical specifications:

    Max drilling capacity on cast iron with pre-drilling holeØ 40 mm

    Max drilling capacity on steel with pre-drilling hole(s235jr)Ø 35 mm

    Continuous drilling capacityØ 30 mm

    Tapping capacity22 mm

    Spindle taperCM 4

    Chuck sizes1 ÷ 16 B16

    Approx spindle speeds(12 ) 75 ÷ 3200 rpm

    Spindle travel120 mm

    Spindle rotationDx - Sx

    Head tilt left and right±60°

    QuillØ 76 mm

    ColumnØ 115 mm

    Feed range(3) 0,1 - 0,18 - 0,26 mm/g

    Distance between spindle axis and column297 mm

    Distance between spindle nose and table715 mm

    Distance between spindle nose and base1180 mm

    Table dimensions500 x 460 mm

    Slot14 mm

    Base dimensions470 x 670 mm

    Motor400 V 50 Hz 1,1/1,5 kW

    Dimensions700 x 480 x 1850 mm

    Net weight340 kg


    3 859,00 € 3 163,11 € + VAT * Order managed in 24h

    Free shipping !Free shipping

    prompt deliveryFast delivery (3-5 days) with DHL Courier in Germany

    Choose your country
    Do you have a question ? We answer 7 days a week !
    Access to the data sheet
  • Geared milling drilling machine FERVI T047/400V

    GEARED MILLING DRILLING MACHINE FERVI

    REVERSIBLE WITH COOLANT SYSTEM AND TEMPORISED TAPPING.

    Included in the price:

    -Self-locking chuck 1 ÷ 16 B16

    -Keyed chuck 1 ÷ 13 B16

    -Drill chuck shank MT 4 B16

    -Spindle taper shank MT 4 ø27 mm

    -Reduction sleeve MT 4/3

    -Reduction sleeve MT 3/2

    -Oilers

    -Tie rod M16

    -Service keys

    Technical specifications:

    Max drilling capacity on cast iron with pre-drilling hole: Ø 40 mm

    Drilling capacity:Steel C60: Ø 32 mm

    Face milling cutter max: Ø 80 mm

    End milling capacity: Ø 25 mm

    Tapping capacity: Ø 22 mm

    Spindle taper: CM 4

    Approx spindle speeds: (6) 75 ÷ 1600 rpm

    Spindle travel: 130 mm

    Spindle rotation: Dx - Sx

    Quill: Ø 76 mm

    Column: Ø 115 mm

    Head tilt left and right: ± 60°

    Manual vertical feed division: 0.02 mm

    Distance between chuck and column: 260 mm

    Distance between spindle nose and table: 715 mm

    Table dimensions: 585 x 190 mm

    Table slots: 12 mm

    Longitudinal axis: 360 mm

    Cross axis: 250 mm

    Base dimensions: 648 x 412 mm

    Base slot: 14 mm

    Motor: 400 V 50 Hz 1,1 - 1,5 kW

    Cooling pump: 400v 50 Hz 0.4 KW

    Overall sizes: 740 x 790 x 1960h mm

    Net weight: 355 kg


    4 219,00 € 3 458,20 € + VAT * Order managed in 24h

    Free shipping !Free shipping

    prompt deliveryFast delivery (3-5 days) with DHL Courier in Germany

    Choose your country
    Do you have a question ? We answer 7 days a week !
    Access to the data sheet
  • Geared milling drilling machine FERVI T047/230V

    GEARED MILLING DRILLING MACHINE FERVI

    REVERSIBLE WITH COOLANT SYSTEM AND TEMPORISED TAPPING.

    Included in the price:

    -Self-locking chuck 1 ÷ 16 B16

    -Keyed chuck 1 ÷ 13 B16

    -Drill chuck shank MT 4 B16

    -Spindle taper shank MT 4 ø27 mm

    -Reduction sleeve MT 4/3

    -Reduction sleeve MT 3/2

    -Oilers

    -Tie rod M16

    -Service keys

    Technical specifications:

    Max drilling capacity on cast iron with pre-drilling holeØ 40 mm

    Drilling capacity:Steel C60Ø 32 mm

    Face milling cutter maxØ 80 mm

    End milling capacityØ 25 mm

    Tapping capacityØ 22 mm

    Spindle taperCM 4

    Approx spindle speeds(6) 75 ÷ 1600 rpm

    Spindle travel130 mm

    Spindle rotationDx - Sx

    QuillØ 76 mm

    ColumnØ 115 mm

    Head tilt left and right± 60°

    Manual vertical feed division0.02 mm

    Distance between chuck and column260 mm

    Distance between spindle nose and table715 mm

    Table dimensions585 x 190 mm

    Table slots12 mm

    Longitudinal axis360 mm

    Cross axis250 mm

    Base dimensions648 x 412 mm

    Base slot14 mm

    Single-phase motor230 V 50 Hz 1,5 kW

    Cooling pump230v 50 Hz 0.4 KW

    Overall sizes740 x 790 x 1960h mm

    Net weight355 kg


    4 391,00 € 3 599,18 € + VAT * Order managed in 24h

    Free shipping !Free shipping

    prompt deliveryFast delivery (3-5 days) with DHL Courier in Germany

    Choose your country
    Do you have a question ? We answer 7 days a week !
    Access to the data sheet

DRILL PRESSES

The professional drill press is an essential tool for drilling flat surfaces, achieving excellent results in terms of precision and timing. The name benchtop drill press derives precisely from the fact that this tool is equipped with a power tool in a vertical position with respect to the workbench.

The main feature of the fervi drill press is precisely that it has a drilling element which, by means of a lever controlled by the operator, slowly rises and falls vertically in order to drill with precision. If the bench drill is equipped with a special regulator, it is also possible to adjust the inclination at which it is to be drilled. Various types of materials can be drilled with this power tool, such as wood, plastics, resins, steel sheets and profiles, aluminium and other metal alloys, with a drilling depth ranging from 30 to 80 millimetres, depending on the type of fervi drill used.

Tendentially used by craftsmen and professionals, the professional drill press can now also be purchased by DIY enthusiasts at a low cost thanks to the cheaper options on the market. Tuttosaldatura offers various models of the fervi drill press, from the smallest and easily transportable version to the largest and most robust, all at the best price.

The drill press can be placed on a workbench without taking up too much space, and it is recommended to fix it in place so that it is more stable when drilling. Another version of the professional drill press is the stationary drill press; this version is dedicated to working on large workpieces and with greater drilling depths. This model of drill must be fixed to the floor in a precise position.

Some of the most important features of a fervi drill press to consider are for example

- the maximum drilling depth that can be reached by that specific model; you need to assess how much force you need to drill a specific material to a specific depth.

- the rotation speed of a drill must be chosen according to the work to be carried out and the type of material to be drilled.

- a fervi drill press can have two types of transmission, depending also on the size of the drill. The first type of transmission that is used is the gear drive. a drill press equipped with this type of transmission is usually large, with robustness and reliability as the benchmark, adding multiple functions available. The second type of transmission that is used is the belt drive, a bench drill equipped with this transmission is lighter and more transportable, usually smaller in size. The main point of differentiation is the 30 mm diameter, drills with gear drives use bits larger than 30 mm, those with belt drives use bits smaller than 30 mm in diameter.

Recommended safety measures while using a professional drill press

Proper use of the tool is the most logical safety measure to always keep in mind; never stop the rotation of the chuck with your hands but always wait for it to stop by inertia. Keeping the drill press and the support table clean and tidy ensures that the tool lasts longer, while at the same time decreasing the risk that any splinters left by the workpieces may be ejected in the direction of the operator, putting the operator's eyes at risk; it is therefore advisable to always wear protective glasses for the eyes. The clothing used should also be taken into consideration and it is recommended to use a Fervi drill press with clothing that covers the entire body without leaving areas exposed to possible dangers; hands in particular should be protected with suitable gloves.

The Fervi brand
Tuttosaldatura collaborates with Fervi for all drilling, finishing and metal grinding equipment.

Fervi stands out as a solid and competitive company and is the reference point for the design and distribution of high quality and reliable machine tools. The variety of products offered by Fervi facilitates not only large companies but also small craftsmen, concretely improving the quality of their daily work, offering functional and safe machinery suitable for every need.



Do you have a question ?
We answer by email 7 days a Week !
8-12 / 14-18 hours at the fixed number +390444 1466709




Close

You have added this product to your cart.

Keep shopping

Newsletter

Restez informé de nos nouveautés, nos promotions..