Diameter 115

Thickness: 1.0 and 1.6mm

Bore 22.23mm

Max RPM 13300.

Flat Centre

For universal use for cutting stainless steels, steel alloys and treated and non-treated steels.

Minimized burr formation

Diameters: 115 and 125mm

Thickness 6.5mm

Bore 22.23mm

Max RPM 13300 x diameter 115 and RPM 12200 x diameter 125.

Depressed Centre

For use for deburring stainless steels.

Also suitable for deburring hard cast irons.

Diameters: 115 and 125mm

Thickness 6.5mm

Bore 22.23mm

Max RPM 13300 x diameter 115 and RPM 12200 x diameter 125

Depressed Centre

For use for deburring steels, stainless steels and heavy-duty cast irons.

Suitable for deburring on extended surfaces.

Diameter 115

Grit 40

SINGLE-FLAP

For use for a wide variety of not too heavy-duty machining operations on stainless steels, ferrous and non-ferrous metals.

Exceptionally high performance discs.

For use on stainless steels, steel alloys and treated and nontreated steels. High level material removal combined with low disc consumption.

Minimum heating of the disc during machining. Minimized burr formation.

The use of high power tools is recommended.

Thickness: 1 or 1.6mm

Bore 22.23

Max RPM 13300

Diameter 115

Abra Beta thin cutting disc, Smart economic line

Disc geometry: Flat center.

Diameter: 230

Thickness: 2 mm

Hole: 22.23 mm

Grit: 36, Hardness R.

Max RPM: 6600

For universal use for cutting non-treated steels.

Accurate and concentrated stock removal and consequently low power consumption of the power tool.
Minimized burr formation.

Diameter 115

Available with Grit 40 or 60

SINGLE-FLAP

For use for operations on stainless steels, ferrous and non-ferrous metals.

Coarse grits are suitable for grinding and rough grinding operations, fine grits are particularly suitable for finishing operations.

Use for machining operations on aluminium, brass, bronze surfaces

The treatment of the aluminium oxide cloth with stearate prevents problems of disc clogging and ensures a better discharge of machining waste.

Cloth treated with grinding active additive to avoid overheating of the work surface.

Grit: 40 and 60

Diameter 115

Single-flap

For use for finishing and cleaning operations of the work surface.

The texture of the disc prevents abrasive clogging during use.

Diameter 115

Bore 22

Blade for band saw machine 1335X13X0,65

Suitable for NEBES TM101 PLUS

HSS M42.

Toothing 8/12

The martensin tooth structure and high cobalt content create excellent thermal resistance by reducing wear rates at high cutting speeds. Thanks to a steel band support structure with a high chromium content, the blade is able to withstand considerable bending, tension and pressure stresses normally present during cutting operations on modern machines.

Blade for band saw machine 1735X13X0,90

Suitable for NEBES TM176

HSS M42.

Toothing 8/12

The martensin tooth structure and high cobalt content create excellent thermal resistance by reducing wear rates at high cutting speeds. Thanks to a steel band support structure with a high chromium content, the blade is able to withstand considerable bending, tension and pressure stresses normally present during cutting operations on modern machines.

Replacement blade for 2080X20X0.90 band saw.

HSS M42 cutting tips.

8/12 teeth.

The martensitic structure of the teeth and the high cobalt content create excellent thermal resistance, reducing wear rates at high cutting speeds. Thanks to a steel band structure with a high chromium content, the blade is able to withstand the considerable bending, tension, and pressure stresses normally encountered during cutting operations on modern machines.

NEBES TM101 PLUS

Band saw machine Nebes Tm101 Plus.

Aluminium structure, Adjustable cutting angle ranging from 0° to 45°.

Continuous cutting speed change
Arc-shaped body frame locking device making the structure easy to transport
Overdimensioned piece locking vice made from cast iron and aluminium, with steel inserts
Base with non-scratch feet
Like all Nebes sawing machines, this machine is also equipped with cast iron pulleys: dry cutting or cutting
process by means of lubro-refrigerant sprayers.

Cutting capacity diameter: 105mm

Cutting speed from 30 to 80 m/min.

Blade size 1335x13x0.65

Installation power 1.01kw

Weight 21.5 kg.

Dimensions 73x38x45

NEBES TM125 INVERTER

Band saw machine Nebes Tm125 inverter

Aluminium structure, Adjustable cutting angle ranging from 0° to 60°
Electronic variable speed and thermal protection, preventing eventual motor overload.

Quick-clamping arc device for an easier trasportation
Extra large vise in cast iron and aluminum with steel facings.

Anti-scratch base with rubber feet.
Cast iron pulleys without rubber facings makes them everlasting.
Double conic ball bearings and eccentric flange for maximum cutting precision.

Cutting capacity diameter: 125mm

Cutting speed from 30 to 80 m/min.

Installation power 1.01kw

Blade dimensions 1440x13x0.65

Weight 22 kg.

Dimensions 73x38x45

RADIAL DRILL PRESS WITH DRIVE BELT FERVI

ROTATING AND TILTING TABLE WITH DOUBLE ARM, TILTING HEAD, ELECTRICAL SYSTEM WITH SEPARATE 24V CIRCUIT FOR ON-BOARD MACHINE CONTROLS.

Included in the price: 

-Keyless chuck 1-16mm/B16

-Drill chuck shank MT 2

Technical specifications:

Max drilling capacity on cast iron with pre-drilling hole: Ø 20 mm

Max drilling capacity on steel with pre-drilling hole(s235jr): Ø 16 mm

Continuous drilling capacity: Ø 12 mm

Spindle taper: CM 2

Chuck sizes: 1 - 16 mm B16

Approx spindle speeds: (12) 300 ÷ 2550 rpm

Spindle travel: 65 mm

Quill: ø 40 mm

Column: ø 72 mm

Sliding travel: 280 mm

Head tilt left and right: 90º L ; 45º R

Height: 810 mm

Distance chuck-column: 375 mm

Distance between spindle nose and base: 505 mm

Table dimensions: ø 290 mm

Tilting table: ± 45°

Single-phase motor: 230 V 50 Hz 0,375 kW

Dimensions: 950 x 300 x 810h mm

Net weight: 46 kg

TROLLEY C900/CC03 COMPLETE WITH TOOLS

With a side handle, top protection made of expanded polypropylene, 6 drawers with telescopic ball-bearing runners and an oil-resistant inner mat, a central front lock with 2 folding keys, 2 fixed castors and 2 swivel castors with weight-activated brakes made of impact-resistant and non-slip thermoplastic rubber

TROLLEY C960A COMPLETE WITH TOOLS

With a side handle, expanded polypropylene top, steel sheet body with impact-resistant guards and perforated side panels, 7 fully extendable drawers with telescopic ball-bearing runners and an oil-resistant mat, anti-tip function, document lock, shelf, roll holder, perforated rear panel and laminate top.

NEBES TM176 Inverter

Band saw machine Nebes Tm176 Inverter.

Aluminium structure, Adjustable cutting angle ranging from 0° to 60°
Continuous cutting speed change
Arc-shaped body frame locking device making the structure easy to transport.

Overdimensioned piece locking vice made from cast iron and aluminium, with steel inserts.

Base with non-scratch feet

Like all Nebes sawing machines, this machine is also equipped with cast iron pulleys: dry cutting or cutting process by means of lubro-refrigerant sprayers.

Cutting capacity diameter: 150mm

Cutting speed from 30 to 80 m/min.

Blade dimensions 1735x13x0.90

Installation power 2kw

Weight 32 kg.

Dimensions 97x46x70

FLOOR DRILL PRESS WITH DRIVE BELT FERVI

INCLINABLE TABLE. ELECTRICAL SYSTEM WITH SEPARATE 24V CIRCUIT FOR ON-BOARD MACHINE CONTROLS.

Included in the price:

-Keyless chuck 5-20mm B22

-Drill chuck shank MT 4

Technical specifications:

Max drilling capacity on cast iron with pre-drilling hole: Ø 32 mm

Max drilling capacity on steel with pre-drilling hole(s235jr): Ø 28 mm

Continuous drilling capacity: Ø 20 mm

Spindle taper: MT 4

Chuck sizes: 5-20 mm B22

Approx spindle speeds: (12) 150 ÷ 2450 rpm

Spindle travel: 120 mm

Quill: ø 62 mm

Column: ø 92 mm

Height: 1710 mm

Distance column-chuck: 260 mm

Table dimensions: 460 x 425 mm

Slot: 14 mm

Tilting table: ± 45°

Single-phase motor: 230 V 50 Hz 1,5 kW

Net weight: 125 kg

FERVI A007I modular workshop furniture

THE OPTIMAL SOLUTION FOR FURNISHING YOUR WORKSHOP, GARAGE OR RACING CORNER.

Accessories included in the price:

• 2 WALL CABINETS WITH GAS SPRINGS [A007/01]
• 1 TALL CABINET WITH 3 INTERNAL SHELVES [A007/02]
• 1 MULTIFUNCTIONAL LOW CABINET [A007/06]
• 2 JOINT PROFILES FOR PERFORATED PANELS [A007/07]
• 1 WOODEN SHELF [A007/08] 2 PERFORATED PANELS [A007/10]
• 1 PROFILE FOR PERFORATED PANELS [A007/11]
• 1 7-DRAWER CHEST OF DRAWERS ON BEARINGS [A007/17]

Dimensions: 1960 x 498 x 2000h mm

Gross weight: 220.00 kg

Floor drill press with drive belt FERVI

NEW BELT TENSION DEVICE, REVERSIBLE TABLE WITH INTEGRATED SLIDING VICE , DRILLING DEPTH READOUT, LED LIGHT INCLUDED. ELECTRICAL SYSTEM WITH SEPARATE 24V CIRCUIT FOR ON-BOARD MACHINE CONTROLS.

Included in the price:

-Keyless chuck 1

-Drill chuck shank MT 4

Technical specification:

Max drilling capacity on cast iron with pre-drilling hole: Ø 32 mm

Max drilling capacity on steel with pre-drilling hole(s235jr): Ø 28 mm

Continuous drilling capacity: Ø 20 mm

Spindle taper: 4

Spindle taper: 1 - 16 mm B18

Approx spindle speeds: (12) 150 ÷ 2450 rpm

Spindle travel: 120 mm

Quill: ø 62 mm

Column: ø 92 mm

Height: 1720 mm

Distance chuck-column: 255 mm

Distance between spindle nose and table: 700 mm

Table dimensions: 460 x 425 mm

Distance between spindle nose and base: 1220 mm

Slot: 14 mm

Vice: 210 x 165 mm

Single-phase motor: 230 V 50 Hz 1,5 kW

Net weight: 135 kg