For use for cutting stainless steels, steel alloys and treated steels.

Accurate and concentrated material removal that reduces the power consumption of the power tool.

Minimum heating of the disc.

Minimized burr formation.

Thickness: 1.0 and 1.6mm.

Bore 22.23mm

Max RPM 13300

Flat Centre

Depressed Centre

Diameter: 115 and 125mm

Thickness 6.4mm

Bore 22.23mm

Max RPM 13300 x diameter 115 and RPM 12200 x diameter 125

For use for deburring steels with extended grinding surfaces and heavy-duty cast irons.

Diameter 125

Thickness: 1.0 and 1.6mm

Bore 22.23mm

Max RPM 12200.

Flat Centre

For universal use for cutting stainless steels, steel alloys and treated and non-treated steels.

Minimized burr formation

Diameter 115

Grit 40

SINGLE-FLAP

For use for a wide variety of not too heavy-duty machining operations on stainless steels, ferrous and non-ferrous metals.

For use for cutting aluminium, brass and bronze.

The abrasive lubrication prevents clogging during machining.

Thickness: 1.2 and 1.6mm

Bore 22.23

Max RPM 13300

Diameter 115

For use for deburring aluminium, brass and bronze.

The abrasive lubrication prevents clogging during machining.

Diameter 115

Thickness 6.5mm

Bore 22.23

Max RPM 13300

Diameter 115

Available with Grit 40 or 60

SINGLE-FLAP

For use for operations on stainless steels, ferrous and non-ferrous metals.

Coarse grits are suitable for grinding and rough grinding operations, fine grits are particularly suitable for finishing operations.

Thinner cutting discs for stainless steel/steel 

Blade geometry: Depressed centre.

Diameter: 230

Thickness: 2mm

Hole: 22.23mm

Grit 36, Hardness Q

Max RPM: 6600

For universal use for cutting stainless steels, steel alloys and treated and non treated steels.

The Silver disc range offers an excellent compromise between price and quality.

The wide variety of products offered makes it particularly versatile and suitable for all machining operations requiring high performance.

Professional discs that can be used for operations on stainless steels, ferrous and non-ferrous metals.

Recommended for machining operations on shaped and angle surfaces.

The greater flexibility of the “Soft” sheets allows a lower overheating of the Disc and assures a lower aggressiveness compared to the traditional disc.

Available Diameter: 115 and 125mm

Grit 40

Single-flap

ZIRCONIA CLOTH - Cotton backing pad

For use for polishing operations on all types of steel and stainless steel, combined with abrasive polishing pastes. Particularly suitable for operations on automotive bodywork.

Diameter 115

Single-flap

GLASS FIBER BACKING PAD

Flat profile

Blade for band saw machine 1440X13X0,65

Suitable for NEBES TM125

HSS M42.

Toothing 8/12

The martensin tooth structure and high cobalt content create excellent thermal resistance by reducing wear rates at high cutting speeds. Thanks to a steel band support structure with a high chromium content, the blade is able to withstand considerable bending, tension and pressure stresses normally present during cutting operations on modern machines.

Replacement blade for 2040X20X0.90 band saw.

HSS M42 cutting tips.

8/12 teeth.

The martensitic structure of the teeth and the high cobalt content create excellent thermal resistance, reducing wear rates at high cutting speeds. Thanks to a steel band structure with a high chromium content, the blade is able to withstand the considerable bending, tension, and pressure stresses normally present during cutting operations on modern machines.

Replacement blade for band saw 2450X27X0.90

HSS M42 cutting tips.

8/12 teeth

The martensitic structure of the teeth and the high cobalt content create excellent thermal resistance, reducing wear rates at high cutting speeds. Thanks to a steel blade structure with a high chromium content, the blade is able to withstand the considerable bending, tension, and pressure stresses normally encountered during cutting operations on modern machines.

ANGLE GRINDER 2200W MILWAUKEE AG 22-230 DMS

Powerful, 2200 W motor with powder field coating for long life time and outstanding performance in all applications

Extreme compact design with an overall short length of 485 mm and 5.2 kg for most comfortable handling

Burst resistant keyed safety guard

External brush doors for easy access to the brushes for fast servicing

NO LOAD SPEED (RPM) 6600

DISC DIAMETER (MM) 230

MAX. CUTTING DEPTH (MM) 68

WEIGHT (kg) 5.2

BRAKE NO

Deadman switch

NEBES TM125 INVERTER

Band saw machine Nebes Tm125 inverter

Aluminium structure, Adjustable cutting angle ranging from 0° to 60°
Electronic variable speed and thermal protection, preventing eventual motor overload.

Quick-clamping arc device for an easier trasportation
Extra large vise in cast iron and aluminum with steel facings.

Anti-scratch base with rubber feet.
Cast iron pulleys without rubber facings makes them everlasting.
Double conic ball bearings and eccentric flange for maximum cutting precision.

Cutting capacity diameter: 125mm

Cutting speed from 30 to 80 m/min.

Installation power 1.01kw

Blade dimensions 1440x13x0.65

Weight 22 kg.

Dimensions 73x38x45

RADIAL DRILL PRESS WITH DRIVE BELT FERVI

ROTATING AND TILTING TABLE WITH DOUBLE ARM, TILTING HEAD, ELECTRICAL SYSTEM WITH SEPARATE 24V CIRCUIT FOR ON-BOARD MACHINE CONTROLS.

Included in the price: 

-Keyless chuck 1-16mm/B16

-Drill chuck shank MT 2

Technical specifications:

Max drilling capacity on cast iron with pre-drilling hole: Ø 20 mm

Max drilling capacity on steel with pre-drilling hole(s235jr): Ø 16 mm

Continuous drilling capacity: Ø 12 mm

Spindle taper: CM 2

Chuck sizes: 1 - 16 mm B16

Approx spindle speeds: (12) 300 ÷ 2550 rpm

Spindle travel: 65 mm

Quill: ø 40 mm

Column: ø 72 mm

Sliding travel: 280 mm

Head tilt left and right: 90º L ; 45º R

Height: 810 mm

Distance chuck-column: 375 mm

Distance between spindle nose and base: 505 mm

Table dimensions: ø 290 mm

Tilting table: ± 45°

Single-phase motor: 230 V 50 Hz 0,375 kW

Dimensions: 950 x 300 x 810h mm

Net weight: 46 kg

NEBES TM176 Inverter

Band saw machine Nebes Tm176 Inverter.

Aluminium structure, Adjustable cutting angle ranging from 0° to 60°
Continuous cutting speed change
Arc-shaped body frame locking device making the structure easy to transport.

Overdimensioned piece locking vice made from cast iron and aluminium, with steel inserts.

Base with non-scratch feet

Like all Nebes sawing machines, this machine is also equipped with cast iron pulleys: dry cutting or cutting process by means of lubro-refrigerant sprayers.

Cutting capacity diameter: 150mm

Cutting speed from 30 to 80 m/min.

Blade dimensions 1735x13x0.90

Installation power 2kw

Weight 32 kg.

Dimensions 97x46x70

FLOOR DRILL PRESS WITH DRIVE BELT FERVI

INCLINABLE TABLE. ELECTRICAL SYSTEM WITH SEPARATE 24V CIRCUIT FOR ON-BOARD MACHINE CONTROLS.

Included in the price:

-Keyless chuck 5-20mm B22

-Drill chuck shank MT 4

Technical specifications:

Max drilling capacity on cast iron with pre-drilling hole: Ø 32 mm

Max drilling capacity on steel with pre-drilling hole(s235jr): Ø 28 mm

Continuous drilling capacity: Ø 20 mm

Spindle taper: MT 4

Chuck sizes: 5-20 mm B22

Approx spindle speeds: (12) 150 ÷ 2450 rpm

Spindle travel: 120 mm

Quill: ø 62 mm

Column: ø 92 mm

Height: 1710 mm

Distance column-chuck: 260 mm

Table dimensions: 460 x 425 mm

Slot: 14 mm

Tilting table: ± 45°

Single-phase motor: 230 V 50 Hz 1,5 kW

Net weight: 125 kg

FERVI A007I modular workshop furniture

THE OPTIMAL SOLUTION FOR FURNISHING YOUR WORKSHOP, GARAGE OR RACING CORNER.

Accessories included in the price:

• 2 WALL CABINETS WITH GAS SPRINGS [A007/01]
• 1 TALL CABINET WITH 3 INTERNAL SHELVES [A007/02]
• 1 MULTIFUNCTIONAL LOW CABINET [A007/06]
• 2 JOINT PROFILES FOR PERFORATED PANELS [A007/07]
• 1 WOODEN SHELF [A007/08] 2 PERFORATED PANELS [A007/10]
• 1 PROFILE FOR PERFORATED PANELS [A007/11]
• 1 7-DRAWER CHEST OF DRAWERS ON BEARINGS [A007/17]

Dimensions: 1960 x 498 x 2000h mm

Gross weight: 220.00 kg

Floor drill press with drive belt FERVI

NEW BELT TENSION DEVICE, REVERSIBLE TABLE WITH INTEGRATED SLIDING VICE , DRILLING DEPTH READOUT, LED LIGHT INCLUDED. ELECTRICAL SYSTEM WITH SEPARATE 24V CIRCUIT FOR ON-BOARD MACHINE CONTROLS.

Included in the price:

-Keyless chuck 1

-Drill chuck shank MT 4

Technical specification:

Max drilling capacity on cast iron with pre-drilling hole: Ø 32 mm

Max drilling capacity on steel with pre-drilling hole(s235jr): Ø 28 mm

Continuous drilling capacity: Ø 20 mm

Spindle taper: 4

Spindle taper: 1 - 16 mm B18

Approx spindle speeds: (12) 150 ÷ 2450 rpm

Spindle travel: 120 mm

Quill: ø 62 mm

Column: ø 92 mm

Height: 1720 mm

Distance chuck-column: 255 mm

Distance between spindle nose and table: 700 mm

Table dimensions: 460 x 425 mm

Distance between spindle nose and base: 1220 mm

Slot: 14 mm

Vice: 210 x 165 mm

Single-phase motor: 230 V 50 Hz 1,5 kW

Net weight: 135 kg