Free shipping on purchases over 300€

Online support / Phone
Email : info@top-welding.com

Choose your country Estonia

€ (EUR)

No products

0,00 € Shipping
0,00 € Total

Check out

  • Your Account
DECA MIG/MAG welding machine


DECA wire welder Estonia

Choose your country
There are 4 products in category DECA MIG/MAG welding machine.



DECA wire welding machine

MIG/MAG welding is a gas shielded arc welding process. A consumable wire is used to add material to give strength to the weld. This type of process can use an inert gas (MIG) or an active gas such as co2 (MAG).

The most common wire diameters in this type of welding are 0.8, 1.0, 1.2, 1.6 mm and in some cases 2.4 mm. The choice of diameter is very important because each thickness must be used at different amperages.

The main advantages of the MIG/MAG process with a DECA wire welding machine are:

1. can be welded in all positions;

2. no dirt to remove;

3. good appearance or finish;

4. low formation of polluting and toxic gases;

5. welding thickness from 0.7 to 6mm without joint preparation;

6. high productivity and high rate of metal added

7. professional technical support and after-sale service guaranteed

The main advantages of this process are high productivity and excellent quality.

In the MIG (Metal Inert Gas) variant, the shielding gas is inert (it does not act actively in the welding process) and makes the arc very stable. In MAG (Metal Active Gas) welding, on the other hand, the shielding gas intervenes thermodynamically in the welding process.

Wires of a DECA wire welding machine

There are several DECA wire welding machines on the market that can be equipped with different welding wires. Mainly, the wires are distinguished depending on their chemical compositions. What you need to consider when buying a spool of wire is that no impurities or moisture are present on it. Also, a non-homogeneous wire could be the cause of an unstable weld and therefore the final result could be disappointing.

The main division is made between solid and flux-cored wires.

Solid wires: they have the same composition; diameters can start from 0.6 mm up to 1.6 mm. In addition, this type of wire consists only of metal.

Flux-cored wires: they consist of a core of flux material and the base metal; during the welding process the flux component burns and creates an atmosphere that surrounds the weld pool and thus replaces the gaseous protection provided by the gas.

With Deca wire welding machines, many materials can be welded, including aluminum, stainless steel, carbon steel.

DECA no-gas continuous wire welding machine

The catalog of DECA no gas continuous wire welding machines is very extensive, and there are many products that can be used for professional or semi-professional work, but also for small DIY jobs around the home. Often, a DECA no gas wire welding machine is used for its practicality, because it does not require the equipment needed to use gas. You save on the cylinder, but you should consider that the flux-cored wire has a slightly higher cost. Many of DECA wire welding machines are multi-process, so one machine can be used for several processes. All DECA no gas continuous wire welding machines are very good value for money.

DECA continuous wire welding machine with gas

In the case of DECA continuous wire welding machine with gas, the choice that is provided by the manufacturer is very wide, and you can find tools suitable for everyone.

Usually, a welding machine with gas is chosen because of the stability of the arc during welding.

The DECA wire welding machine with gas may be bulkier to transport, given the presence of the cylinder and pressure reducer. Many DECA wire welding machines are multi-process and can also perform MMA and TIG welding in DC. This is an excellent solution that allows you to use the most suitable process for the work that you have to do.

In conclusion, the Deca wire welding machine is excellent for those who work, but also for all DIY enthusiasts. It is very easy to use and does not require many accessories; the important thing is to always have protective equipment such as gloves and a welding mask.



Do you have a question ?
We answer by email 7 days a Week !
8-12 / 14-18 hours at the fixed number +390444 1466709




Close

You have added this product to your cart.

Keep shopping

Newsletter

Restez informé de nos nouveautés, nos promotions..