HELVI Sparc 160 | Inverter MMA welder in carton case Poland

HELVI SPARC 160 KIT IN CARTON CASE

Small, easily transportable and handy welding machine with a simple and intuitive control panel. Sparc 160 is a DC welding power source for coated electrode welding, ideal for do-it-yourself welding or light maintenance; supports the use of rutile, basic, stainless, cast iron... electrodes.

Maximum current of 160A.

Excellent for welding coated electrodes with diameters from 1.6 to 3.2 millimetres. Helvi Sparc 160 has a duty cycle of 80 amps at 100% and 25% at maximum current of 160 amps. Almost fully exploitable with the 3KW of the domestic grid, it allows intensive welding of 2 and 2.5 mm diameter rutile electrodes.

The generator is equipped with the most advanced automatic systems to assist the operator during welding:

HOT-START : voltage peak during ignition to facilitate the ignition of the welding arc, very useful for the ignition of basic coated electrodes.

ANTI-STICK : automatic system which prevents the electrode from sticking to the base material.

ARC-FORCE : device that increases the force of the arc; useful when the operator is welding in particular positions.

Enables DC TIG welding for steel and stainless steel with optional torch with valve and lift trigger

The Sparc 160 welding machine is supplied ready to use, the generator is sold including:

• electrode holder clamp with 3 metre cable and 16 mmq
• earth clamp with 2 metre cable and 16 mmq,
• a hammer/brush for cleaning the slag,
• manual mask with 75x98 glass,
• all supplied in a handy cardboard case