MIG Welding wire coil - 200mm Netherlands

5kg

Wire diameter: 0.8 mm

It is suitable for welding thin, galvanised or electro-galvanised sheets. Zinc forms a very compact and stable protective layer on the surface of the steel, protecting it from rust and corrosion. During welding, the surface zinc melts, partially evaporating and partially diluting in the weld pool. To avoid zinc residues in the deoxidising elements of the deposit, Al and Ti are added. After welding, it is recommended to restore the protective surface in the weld area and adjacent areas using cold galvanising products.

ISO 14341-A G 42 2 M 21 Z

AWS A5.18

ER70S-G

Wire developed for welding galvanised structural constructions. The presence of microalloying elements is optimised to minimise zinc contamination in the weld pool, allowing direct welding on the galvanised surface and minimising spatter. It therefore exhibits better welding characteristics than standard non-alloyed wires. Good resilience at low temperatures. The use of the wire with synergic inverter generators allows excellent results to be obtained.