The TELWIN Maxima 230 Synergic is a multi-process inverter welder that enables continuous wire welding with gas (MIG/MAG) and, thanks to the 25 mm² DINSE connectors on the front panel, also allows the operator to use an MMA electrode holder or a TIG torch with a valve.
The TELWIN Maxima 230 Synergic is a highly versatile welding generator, designed for light-duty welding and maintenance work.
The Maxima 230 can be powered by a generator; it features built-in protection against overheating, overvoltage, undervoltage and overcurrent.
The welder has a good duty cycle of 180A at 20% and 10A at 60%.
The Maxima 230 is equipped with SYNERGIC technology and the control panel is very easy to use thanks to the intuitive table located inside the coil compartment door. By following the specified parameters for the material, shielding gas and wire thickness, the welder can easily adjust the machine for optimal welding.
The Maxima 230 can perform TIG welding by equipping the power source with a torch featuring a valve on the handle to control gas flow.
This TIG welder operates on direct current and therefore allows welding of iron and stainless steel (not aluminium) with excellent aesthetic results. Arc striking is of the LIFT type, achieved by touching the workpiece with the tungsten electrode. The gas to be used is argon.
The Maxima 230 can weld using MMA coated electrodes, including rutile, basic, stainless steel and cast iron electrodes, with various electronic controls such as Anti-stick and Hot Start. The Arc-force setting is adjustable, allowing the arc voltage to be increased to facilitate welding with these electrodes or to weld in awkward positions.
The Telwin Maxima 230 Synergic welder is supplied with:
Recommended TIG and MMA accessories listed below.
Free shipping
Choose your countryThe Cutmaster 30+ is the perfect combination of power and portability for plasma cutting.
It features an easy-to-use 10.9 cm TFT LCD screen and updated functions for even greater control and flexibility.
Supplied with an SL60 torch, it has a recommended cutting and piercing capacity of 10 mm.
Maximum cut-off capacity: 16 mm
Features:
- Portable and robust, equipped with three handles and a lightweight industrial frame;
- The bright 10.9 cm (4.3-inch) TFT LCD display with a control knob suitable for use with gloves simplifies operation and offers greater control and flexibility;
- 120-240 V single-phase power supply with automatic voltage detection that sets the maximum output amperage;
- Supplied with the SL60 1 industrial torch featuring 2T/4T function, safety trigger lock, and switch between standard sheet metal and mesh cutting modes;
- Automatic air pressure detection and air purge after cutting to extend the life of consumables
- Cutmaster Black Series wear parts included, for up to 60% longer life;
- 3-year warranty on the generator and 1-year warranty on the torch and cables
Supplied complete with:
- Cutmaster 30+ generator,
- SL60 75° torch with cable,
- 3-metre ground cable with clamp,
- wear parts kit,
- 1/4-inch air fitting.
The Cutmaster 30+ is compatible with all 1Torch ATC torch connections.
Free shipping
Choose your country
Italy
Austria
Belgium
Luxembourg
Netherlands
Monaco
Croatia
Denmark
Finland
Greece
Ireland
Portugal
Sweden
Bulgaria
Estonia
Latvia
Lithuania
Czech Republic
Romania
Slovakia
Slovenia
Hungary
Germany
Spain
France
