Free shipping on purchases over 300€

Online support / Phone
Email : info@top-welding.com

Choose your country Spain

€ (EUR)

No products

0,00 € Shipping
0,00 € Total

Check out

  • Your Account

Lincoln SPEEDTEC 200C Multi-Process Welding Machine
Lincoln SPEEDTEC 200C Multi-Process Welding Machine
Maximize

View all products in this category : Multiprocess welding machine MIG-MAG Welding machine

Lincoln SPEEDTEC 200C Multi-Process Welding Machine Spain

1 499,00 € VAT included 1 228,69 € + VAT

Order managed in 24h

livraison gratuite !

Prompt free delivery

K14099-1

- +

Do you have a question ? We answer 7 days a week ! 8-12 / 14-18 hours to the fixed number +390444 1466709 or by e-mail by clicking here.

Specifications of Lincoln SPEEDTEC 200C Multi-Process Welding Machine

Power Supply (V) 115-230V 1Ph 50-60Hz
Fuse (A) 16 A
MIG Regulation Field 20 - 200 A
Duty Cycle MIG-MAG 200A 25% - 110A 100%
TIG Weldable Materials Steel, Stainless Steel, Copper...
Usable Spools Diameter 200 mm
Steel Wire Thickness 0,6 to 1 mm
Stainless Steel Wire Thickness 0,8 - 1 mm
Aluminium Wire Thickness 1 et 1,2 mm
Flux-Cored Wire (no gas) Thickness 1,2 mm
Flux-Cored Wire (no gas) Thickness 0,9 mm
Ventilated Yes
Current Output DC
Thermostatic and Overvoltage Protection Yes
Generator Yes
Weldable Materials Stainless Steel
Weldable Materials Aluminium
Weldable Materials Steel
Welding Processes MMA - MIG - TIG
Warranty 2 years
Dimensions (mm) 396 x 246 x 527
Weight (Kg) 17,2
Wire Feeder 2 rolls
Protection IP 23
Manufacture Europe
Use Professional
pfc Yes

View all products in this category

MIG-MAG Welding machine
Professional MIG/MAG Welding machine
Multiprocess welding machine

LINCOLN SPEEDTEC 200C

Lincoln SPEEDTEC 200C is a multiprocess inverter DC welding machine for MIG/MAG, FLUX, MMA and TIG with LIFT ignition.

Speedtec 200C can generate a maximum welding current of 200 A and it has a duty cycle of 110 A at 100%.

These qualities make it suitable for intensive use in a large variety of applications, from carpentry to automotive, but thanks to its specially designed shockproof body and high degree of protection (IP23), Lincoln SPEEDTEC 200C is also suitable for use on construction sites.

Lincoln SPEEDTEC 200C is equipped with a Power Factor Correction (PFC) optimising the incoming current and it guarantees energy savings of 30% compared to a traditional inverter. The PFC system allows to supply it with a motorgenerator or to use long extension cables (max 100 metres).

The large TFT colour display makes it easy to view and adjust the welding parameters.

Speedtec 200C allows to select between an easy control panel or an advanced control panel, which permit to customise more parameters.

In MIG/MAG and FLUX welding, it is possible to set the synergic mode ; wire speed and voltage are automatically adjusted to guarantee good results.

Using the advanced control panel, the operator can choose between synergic or manual welding and he has the possibility to modify the parameters as slope-up, Pre and Post Gas, Burn Back Time, Spot Time, 2/4 strokes and also the electronic inductance.

In MMA mode, Hot-start and Arc-Force can be adjusted.

Lincoln SPEEDTEC 200C can be connected with a TIG torch 17V with valve and lift ignition for iron, stainless steel and cast iron welding.

Lincoln SPEEDTEC 200C is supplied with:

- Instruction manual

- SPEEDTEC 200C generator

- Gas pipe 2 metres

- Ground cable and clamp 3 metres

- Roller Ø 0.8 and 1 mm for steel wire


More details

    Accessories for Lincoln SPEEDTEC 200C Multi-Process Welding Machine

    30 other products in the same category:
    Previous
    Next
    Feedaty Reviews (6)

    Amazing welder! Happy with my choice after looking for a welder for 1y.

    Very nice Welker, also with using 0.6mm wire

    For what little I've used it, it's a great product...and then it's Lincoln.

    Extremely robust and solid machine, well made, quiet and with an intuitive and practical menu. It has, like all professional machines, several parameters and a simplified menu for hobbyists like me. Unfortunately, I am not an expert welder, so my opinion is very relative, but I am extremely satisfied with the purchase and the machine is fantastic.

    I have only used it a little bit but it looks excellent

    Expensive welder, but after a few settings, it works great. My advice is to use the welder with argon and Co 2 because the quality is higher than flux-cored wire, and not to weld outside when it is windy because the welds do not come out well.

    

    Do you have a question ?
    We answer by email 7 days a Week !
    8-12 / 14-18 hours at the fixed number +390444 1466709




    Close

    You have added this product to your cart.

    Keep shopping

    Newsletter

    Restez informé de nos nouveautés, nos promotions..