Abrasives Discs Denmark

Diameter 115

Thickness: 1.0 and 1.6mm

Bore 22.23mm

Max RPM 13300.

Flat Centre

For universal use for cutting stainless steels, steel alloys and treated and non-treated steels.

Minimized burr formation

Diameters: 115 and 125mm

Thickness 6.5mm

Bore 22.23mm

Max RPM 13300 x diameter 115 and RPM 12200 x diameter 125.

Depressed Centre

For use for deburring stainless steels.

Also suitable for deburring hard cast irons.

Diameters: 115 and 125mm

Thickness 6.5mm

Bore 22.23mm

Max RPM 13300 x diameter 115 and RPM 12200 x diameter 125

Depressed Centre

For use for deburring steels, stainless steels and heavy-duty cast irons.

Suitable for deburring on extended surfaces.

For use for cutting aluminium, brass and bronze.

The abrasive lubrication prevents clogging during machining.

Thickness: 1.2 and 1.6mm

Bore 22.23

Max RPM 13300

Diameter 115

Exceptionally high performance discs.

For use on stainless steels, steel alloys and treated and nontreated steels. High level material removal combined with low disc consumption.

Minimum heating of the disc during machining. Minimized burr formation.

The use of high power tools is recommended.

Thickness: 1 or 1.6mm

Bore 22.23

Max RPM 13300

Diameter 115

Abra Beta thin cutting disc, Smart economic line

Disc geometry: Flat center.

Diameter: 230

Thickness: 2 mm

Hole: 22.23 mm

Grit: 36, Hardness R.

Max RPM: 6600

For universal use for cutting non-treated steels.

Accurate and concentrated stock removal and consequently low power consumption of the power tool.
Minimized burr formation.

Diameter 115

Available with Grit 40 or 60

SINGLE-FLAP

For use for operations on stainless steels, ferrous and non-ferrous metals.

Coarse grits are suitable for grinding and rough grinding operations, fine grits are particularly suitable for finishing operations.

Professional discs that can be used for operations on stainless steels, ferrous and non-ferrous metals.

Recommended for machining operations on shaped and angle surfaces.

The greater flexibility of the “Soft” sheets allows a lower overheating of the Disc and assures a lower aggressiveness compared to the traditional disc.

Available Diameter: 115 and 125mm

Grit 40

Single-flap

ZIRCONIA CLOTH - Cotton backing pad

For use for polishing operations on all types of steel and stainless steel, combined with abrasive polishing pastes. Particularly suitable for operations on automotive bodywork.

Diameter 115

Single-flap

GLASS FIBER BACKING PAD

Flat profile