TELWIN TECHNOMIG 265 DUAL SYNERGIC | Multi-process welding machine (MMA, MIG MAG, TIG) Finland

TELWIN TECHNOMIG 265 DUAL SYNERGIC

TELWIN Technomig 265 Dual Synergic is a multi-process inverter welder that allows you to choose between the following welding processes: MMA, MIG/MAG, FLUX and TIG on a wide range of materials: iron, stainless steel, aluminium, cast iron...

Technomig 265 is suitable for medium/light structural work, but is also particularly advantageous in the bodywork sector thanks to its innovative ATC system.

ATC technology allows for welding, spot welding and material filling with significantly reduced deformation compared to traditional welding.

Technomig 265 features an LCD display, a Euro connector for the MIG/MAG torch, and two 50 mm² DINSE connections that allow connection of a LIFT TIG torch fitted with a valve for argon gas supply.

The welder generates a maximum current of 250 amps; the duty cycle is 220A at 20% and 130A at 60%, allowing for demanding welding operations even on thick materials.

Electronic protection systems are included for over-temperature, over-voltage, under-voltage and over-current, enabling the Technomig 260 Dual Synergic to be used with a generator.

Adjusting MIG/MAG welding parameters has been simplified thanks to ONE TOUCH LCD SYNERGY technology, which allows the operator to customise the arc length. This function enables the final shape of the weld bead (visible on the display) to be adjusted according to the welder’s style.

Technomig 265 is equipped with systems that assist the operator during MMA (coated electrode) welding to make welding easier and achieve better results: HOT-START, ANTI-STICK, ARC-FORCE.

Technomig 265 Dual Synergic is supplied with:

• 1 Mig 25 torch (3 metres)
• 1 x 3-metre cable and earth clamp
• 1 x steel/stainless steel wire feed roll Ø 0.6 and 0.8 mm
• 1 x steel/stainless steel contact tip Ø 0.8 mm
• 1 x gas hose for refillable cylinder