Complete in carry case with MMA accessoieres (electrode holder and earth clamp) and Tig torch 17V with valve for TIG DC welding of steel and stainless steel.
160A MMA Inverter, 230V.
Can weld up to 4.0mm electrodes. Digital control panel.
Many advanced features including MMA Pulse, TIG Lift, Automatic down slope, Hot Start, Anti-sticking and Arc Force Technology.
• Low consumption of 16A-230V, it can be used everywhere.
• Not affected by mains fluctuations or arc length.
• Protected and compatible with a Generator 6Kw (7,5Kva)
ADJUSTABLE HOT START : Oversupply of power at the start
ANTISTICKING : Reduction of the current to remove the electrode
GYSMI E163 is a single-phase DC inverter welding machine for MMA or TIG process with LIFT arc. Ideal for installations or light repairs on iron, stainless steel, cast iron... (no aluminum). Easy control panel with digital display for precise reading.
The generator is very compact, only 4 kg of weight and easy to carry; thanks to the belt. GYS has equipped Gysmi E163 with thermostatic self-protection, undervoltage and overvoltage up to 400V.
GYSMI E163 has a minimum current of 10A and a maximum current of 160 A; this welding generator has a duty cycle of 85A at 60%, suitable for MMA welding with rutil, basic, stainless steel and cast iron electrodes with a thickness between 1.6 and 4 mm.
In TIG welding it can be used a tungsten up to 2.4 mm.
The welding machine has the PULSE MMA function; this technology simplifies the welding in vertical position and gives less deformation on the metal. The welding machine is equipped with the following systems:
Anti-stick and Arc Force;
Adjustable hot start: voltage peak during electrode ignition to start easily basic or particular electrodes.
When using GYSMI E163 in TIG process, it’s possible to set the slope down function from 0 to 10 seconds, very useful to fill the end-of-weld crater.