Lincoln SPEEDTEC 215C is a multiprocess welding machine on wheels for MIG/MAG, FLUX, MMA and TIG (DC) with LIFT ignition.
The 215C can generate a maximum welding current of 200 A and a duty cycle of 110 A at 100% and 25% at 200A; these qualities make it suitable to be used in a wide range of sectors such as carpentry and automotive and thanks to its high degree of protection IP23, Lincoln SPEEDTEC 215C is suitable for construction sites.
This version of SPEEDTEC has pratical shelves and compartments where the operator can store the tools. It is also possible to store the gas bottle behind the machine and to use 200 - 300mm coils.
Lincoln SPEEDTEC 215C is equipped with PFC technology, which optimises the input current, saving up to 30% energy compared to a conventional inverter. The PFC allows the welding machine to be used with a motorgenerator or connected to large extension cables (100 metres).
The easy TFT colour display makes it easy to view and adjust the welding parameters. It is possible to select the easy control panel or the advanced one that allows to adjust more parameters.
Speedtec 215C is synergic and the user has to set the right program with the material, wire thickness and gas type. By using the advanced control panel it’s possible to adjust some parameters as the slope up, Pre and Post Gas, Burn Back Time, Spot Time, 2T or 4T and the electronic reactance.
It is possible to use Lincoln SPEEDTEC 215C with a 17V TIG torch with valve (lift ignition), for iron, stainless steel and cast iron welding.