Online support / Phone
Email : email@example.com
Choose your country Belgium€ (EUR)
Antispatter spray, anti-stick protection against welding spatters.
Formulated to protect welding torches, and pieces being welded.
SILICONE FREE, not flammable.
Felt marker ideal for oily or painted surfaces.
The paint is highly visible and long lasting, it dries fast and it's UV resistant.
It's xylol free and contains a low percentage of alogen and chlorides.
Ecological antispatter spray, anti-stick protection against welding spatters with ECOLOGICAL propellant.
Formulated to protect welding torches and pieces being welded.
SILICONE FREE, chloride free, not flammable.
Cold Zinc spray used for cold galvanization of all metals, suitable for retouches on welded or previously galvanized parts (railings, galvanized structures, parts of bodywork, iron parts exposed to atmospheric agents).
ZINCO SPRAY contains 96-98% pure zinc.
High covering power; a single spray forms a dry elastic film of about 30 micron thickness, that sticks on any surface protecting it from oxidation.
Clear tonality very similar to heat galvanization, it dries quickly (5/6 minutes in surface) and it does not drip.The Aerosol is endued with a no-drop nozzle and it permits to use it without staining.
High resistance to abrasion, corrosin, atmospheric agents, washing, oxidation of salty fog.
It can be overpainted or left as a final protection.
Anti spatter paste protection against welding spatters.
Formulated to protect welding torches wear parts.
Metal box 375 ml
White detector spray for welding cracks and defects.
RILEVATORE BIANCO forms a white dust revealing the welding cracks.
White dust is visible only after using PENETRANTE ROSSO.
Penetrating spray, with very low tension to better penetrate the micro-cracks and weld defects.
Before using PENETRANTE ROSSO clean the area with PULITORE METALLO metal cleaner.
After using PENETRANTE ROSSO use RILEVATORE BIANCO white detector to see the cracks.
Pickling agent gel for removing carbon weld residue from stainless steel.
Easy to use (with an acid-resistant brush or spray).
To be used with Telwin kit brushes 981863
Coolant for welding circuits for water cooled welding torches, formulated to ensure optimum cooling with maximum attention to ecology.
- working temperature from - 20°C to + 120°C
- permanent very low conductivity
- it contains corrosion and limestone inhibitors which protect the circuit
- compatible with all plastics and elastomers (PP, PVC, EPDM)
- compatible with metals (copper, steel, aluminium, alloys, ...)
- It helps the lubrication of rotating mechanisms.
Heat resistant blanket 550°C against welding spatters and projections
1950 x 2000 mm
Marking kit Telwin MARK IT for stainless steel marking of logos, numeber of series, or other informations.
To be used with Telwin Cleantech 200
Liquid Mark It 1L - cod. 804029 x 1
Marking stripes - cod. 981865 x 10
Rubber rings x 10
kit 5 cleaning brushes Telwin
To be used with Telwin Cleantech 200 with BRUSH IT liquid.
Fast delivery (3-5 days) with DHL Courier
|Power Supply (V)||50-60 Hz 1 Ph x 230|
|Access to the data sheet|
Fast delivery (3-5 days) with DHL Courier
In the welding world, both on professional and hobby levels, to get good results you need to have not only a suitable generator and welding torch, but also good consumables (nozzle, wire, ceramics, electrodes, etc.).
The correct use of welding accessories (like calibrated soldering magnets or snap clamps) is no less important and essential to improve the joints’ aesthetics and to get more satisfying results.
One of the most used accessories is the spray for continuous wire weldings; this accessory can usually be found in the form of spray cans.
The welding anti-stick has to be applied on both base material and flaps, near the gap joints or the extremity to weld.
The spray for continuous wire weldings is largely used to avoid welding ledges, namely those anti-aesthetic small bubbles that appear near the welding seam during the continuous wire welding process through short-circuits.
The soldering anti-stick is then used to get an aesthetically better result, restricting or avoiding the phenomenon of the ledges sticking to the base material, thus avoiding the finishing phase that can be difficult because of the welds’ position.
Another type of welding anti-stick is the anti-stick paste; unlike the spray for wire weldings, this article comes in the form of a thick gel. This product has the same function as the spray for wire weldings, but it can also be spread on the joint by using a brush or a sponge.
The anti-stick paste can also be used to preserve and lengthen the durability of the continuous wire welding torches’ consumables; a common practice is to dip the torch’s extremity, to prevent the welding splashes from ruining the wire-guide tip or the protection gas diffuser, which would make the wire’s sliding more difficult thus reducing the nozzle’s life.
Top-welding.com selected the metal-canned anti-stick paste instead of the plastic one, in order to allow the operator to dip the still hot torch without ruining the outside container.